Instruction Manual

More documents

Recommendations

Info

SERVICE AND PARTS POLICYIf you have any question with regard to the performance of your RUGER ®M77 ® MARK II rifle please write or call (603-865-2442) our Product ServiceDepartment in Newport, New Hampshire 03773, fully describing allcircumstances and conditions involved. If you should return your rifle to thefactory for repair, or order parts for it, please comply with the followingsuggestions for prompt service:WARNING: BEFORE SHIPPING ANYFIREARM, BE ABSOLUTELY CERTAIN THAT ITAND ITS MAGAZINE ARE UNLOADED. DONOT SHIP CARTRIDGES WITH A FIREARM.SHIPPING FIREARMS FOR REPAIRRUGER M77 ® MARK II rifles returned to the factory for repair should besent to: Sturm Ruger & Company, Inc., Product Service Department, 411 SunapeeStreet, Newport, New Hampshire 03773. Telephone (603) 865-2442.Guns should be sent prepaid. We will not accept collect shipments.The Federal Gun Control Act, as well as the laws of most States and localities, donot prohibit an individual (who is not otherwise barred from purchasing orpossessing a firearm) from shipping a firearm directly to the manufacturer forrepair. However, before you ship your rifle to us, be certain that your State orlocality does not have a law or regulation which will prohibit you from receivingthe rifle from us after it has been repaired. If such receiving is prohibited, thenplease have a Federally Licensed firearms dealer ship the gun to us. If your rifle issent to us by a dealer, it will be returned to him after being repaired. If a handgun(pistol or revolver) is shipped by an individual who does not hold a FederalFirearms License, it must be shipped for overnight delivery via U.P.S., FederalExpress or other, similar private overnight service. NOTE: Firearms may not beshipped via U.S. Mail. Persons who do not hold a Federal Firearms License areprohibited by Federal law from shipping a handgun by Mail. Handguns mailed inviolation of the law are impounded by the Post Office.DO NOT SEND GUN BOXES OR LITERATURE THAT YOU CONSIDER TO BECOLLECTOR’S ITEMS – THESE ARE INVARIABLY DAMAGED OR DESTROYEDIN SHIPMENT. Please do not include rifle case, sling, telescopic sights or customaccessories with a firearm being shipped to the factory for service. Rifles andshotguns may be shipped via Parcel Post. Always insure your shipment.Enclose a letter which includes your name, address, telephone number, serialnumber and model of the firearm. Describe in detail the trouble you haveexperienced with your firearm, or the work you wish to have done. Merely statingthat the firearm “needs repair” is inadequate information.29
Work performed will bear a net minimum labor charge of $20.00 plus a $12.00shipping and handling charge. The charge for rebluing the M77 ® MARK IIrifle is $50.00 plus a $12.00 shipping and handling charge. Custom gunsmithingservice for nonstandard alterations are NOT AVAILABLE from Ruger ProductService Departments.WARNING –PARTS PURCHASERSIt is the purchaser’s responsibility to beabsolutely certain that any parts ordered fromthe factory are correctly fitted and installed.Firearms are complicated mechanisms andIMPROPER FITTING OF PARTS MAY RESULTIN A DANGEROUS MALFUNCTION, DAMAGETO THE FIREARM, AND SERIOUS INJURY TOTHE SHOOTER AND OTHER PERSONS. Thepurchaser and installer of parts must accept fullresponsibility for the correct adjustment andfunctioning of the rifle after such installation.PARTS MUST FIT CORRECTLYORDERING PARTSPlease contact the New Hampshire Product Service Department for partsavailability and current prices. All parts orders for the RUGER ® M77 ®MARK II should be sent to: Sturm, Ruger & Co., Inc., Product ServiceDepartment, 411 Sunapee Street, Newport, New Hampshire, 03773, 603-865-2442. We cannot comply with open account or C.O.D. requests. Payment in theform of a check, money order, Visa or Mastercard must accompany your order.Credit Card orders must include the account number, expiration date andwhether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus a$3.50 shipping and handling charge. Order parts by Part Number and Part Nameand include the entire serial number of the firearm for which the parts are beingordered. There is a minimum net labor charge of $20.00 plus $12.00 shippingand handling if the parts are factory fitted. All factory-fitted parts are fitted on anexchange basis only. We will not return the replaced parts.Because the receiver of the M77 ® MARK II rifle is a serial numberedcomponent, it is defined as a “firearm” by Federal law and is not sold as aseparate component.*Parts designated by an asterisk must be factory fitted. These parts are fitted onan exchange basis only. We will not return the replaced parts. We will not returnany part that is broken, malfunctioning, badly worn or has been modified. See“Warning — Parts Purchasers,” above.CAUTION: Firearm users are cautioned that a gun containingmodified, broken, malfunctioning, or badly worn parts should notbe fired.30
Page 1 and 2: SBLUED &STAINLESSSTEELINSTRUCTIONMA
Page 3 and 4: Maine:“ENDANGERING THE WELFARE OF
Page 5 and 6: LOCKING DEVICEINSTALLATION INSTRUCT
Page 7 and 8: FIREARMS SAFETY-YOUR RESPONSIBILITY
Page 9 and 10: All mechanical components are made
Page 11 and 12: “Safe” position, the bolt handl
Page 13 and 14: WARNING -AMMUNITIONDeath, serious i
Page 15 and 16: To fire the rifle: When a cartridge
Page 17 and 18: -When attempting to extract a cartr
Page 19 and 20: Before attempting to disassemble th
Page 21 and 22: 5. To reassemble firing pin assembl
Page 23 and 24: 6. If the rifle is to be stored for
Page 25 and 26: External surfaces most subject to r
Page 27: SPECIAL INSTRUCTIONS AND WARNINGFOR
Page 31 and 32: 32Part Name Part No. ModelBolt Stop
Page 33 and 34: 34Part Name Part No. ModelFront Sig
Page 35 and 36: 36Part Name Part No. Model* Safety
Page 37 and 38: RUGER ® M77 ® MARK II RIFLEEXPLOD
Page 39 and 40: RUGER ® M77 ® MARK IITARGET RIFLE
Page 41 and 42: THE BASIC RULES OF SAFE FIREARMS HA
Page 43 and 44: 5. BE SURE OF YOURTARGET BEFORE YOU
Page 45 and 46: A BRIEF ACCOUNT OF AN EXTRAORDINARY

Instruction Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?