CC-Link System Master, Local Module User's Manual QJ61BT11

2 SYSTEM CONFIGURATIONMELSEC-Q2.2 Applicable SystemApplicable PLC CPUs and notes on the system configuration are described below.2.2.1 Applicable modules and number of CPUs that can be mounted(1) Applicable modules and number of CPUs that can be mountedThe CPU modules and network modules (for remote I/O station) to which theQJ61BT11 can be installed and number of modules that can be installed arelisted in the table below.2(a) When performing the parameter setting with the GX DeveloperApplicable module Number of CPUs that can be mounted RemarkCPUmoduleNetworkmoduleQ00JCPUQ00CPUQ01CPUQ02CPUQ02HCPUQ06HCPUQ12HCPUQ25HCPUQ12PHCPUQ25PHCPUQJ72LP25-25QJ72BR15Maximum 2 (Maximum 4Maximum 4 (1 ) (2 )It can bemounted onlywith the Qmode. (1 )Maximum 4 —1 )(b) When performing the parameter setting with the dedicated instructions.Applicable module Number of CPUs that can be mounted (CPUmoduleQ00JCPUQ00CPUQ01CPUQ02CPUQ02HCPUQ06HCPUQ12HCPUQ25HCPUMaximum 2 (Maximum 643 ) Remark1 ) (2 ) (3 )It can bemounted onlywith the Qmode.(1 ) (3 )Q12PHCPUMaximum 64 (1 ) (3 )Q25PHCPU1 See User’s Manual (Function Explanation, Program Fundamentals) for the CPUmodule to use.2 When using Q00J/Q00/Q01CPU, use the QJ61BT11 which function version is B orlater.3 When using the QJ61BT11 as the local station, perform the parameter setting withthe GX Developer.When the Q02/Q02H/Q06H/Q12H/Q25H/Q12PH/Q25PHCPU is used, the maximumnumber of CPUs that can be mounted is 4 where the QJ61BT11 is used as the localstation.When the Q00J/Q00/Q01CPU is used, the maximum number of CPUs that can bemounted is 2 where the QJ61BT11 is used as the local station.2 - 2 2 - 2