(G210) Compact Gateway – Basic Overview Course ... - Genband

(G210) Compact Gateway – Basic OverviewCourse Description:The G210 Compact Gateway Basic Overview, which is 3 hours in length, will providethe student with a high level understanding of the G2’s Basic Hardware,Provisioning, Alarms, Events and the Packet Line Gateway. The course is dividedinto three lessons. Each lesson contains a quiz to determine if the user needs toreview any information. At the completion of the course, a final test is presented.The user must achieve an 85% on the final test to pass the course. The G210 BasicOverview is the pre-requisite to all future G2 classes.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G9 Converged GatewayProductKey Topics:HardwareHardware SpecificationModulesPorts & ConnectorsRedundancyBasic Provisioning & AlarmsBasic ProvisioningCommand Line Interface (CLI)Element Management System (EMS)Alarm & EventsPacket Line Gateway (PLG)Digital Line Unit (DLU)CLI Command DetailsDLU ProvisioningAdd DLU PortmapGlobal Training

Activate DCC & RGMG EquipmentDownload SASC SoftwareElement Management System (EMS)EMS Provisioning PrerequisitesDLU Provisioning ProceduresEmergency Services Module (ESM)Objectives:Prerequisite Skills:Basic Windows skillsBasic telephony knowledgePrerequisite Courses:NoneCourse Length and Delivery Method 3 Hours Self-Paced(G215) Compact Gateway Operations, Administration andMaintenanceCourse Description:This 2-day Leader Led G215 Compact Gateway - Operations, Administration andMaintenance course provides the skills required to perform operational,maintenance,and provisioning tasks on the G2, either via the command line interface (CLI) orGENView.Intended Audience:Global Training

This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G2 Compact GatewayProduct.Objectives:Understand Cooling MaintenanceUnderstand Cable ManagementUnderstand Basic Gateway ProvisioningUnderstand Basic Provisioning via the CLIUnderstand Running DiagnosticsUnderstand Loopback and continuityUnderstand Sigtrace and PM CLI CommandsUnderstand Troubleshooting OverviewUnderstand Troubleshooting with GENViewUnderstand Troubleshooting FaultsUnderstand GPON ApplicationUnderstand Jitter TuningUnderstand Card MaintenanceUnderstand Customer SupportUnderstand NSA UpgradePrerequisite Skills:Basic Understanding of TDM or IP TheoryBasic Unix or Linux commands.Prerequisite Courses:G210 OverviewCourse Length and Delivery Method2 Day Leader ledGlobal Training

(G515) Line Access GatewayCourse Description:This 2-day Leader Led G515 Line Access Gateway course provides the skillsrequired to deploy the G5 Line Access Gateway by understanding the physicalconnections and interfaces. It also will discuss how the features of the G5 LineAccess Gateway will fit in the network.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the G5 Line Access Gateway.Objectives:Understand the benefits of deploying the G5 Line Access GatewayUnderstand the physical connections and interfaces on the systemUnderstand the features of the G5 Line Access Gateway and how it fits in thenetworkUnderstand how to connect a PC to the G5 Line Access GatewayUnderstand how to access the TL1 InterfaceUnderstand how to access the Web InterfaceLearn how to do basic provisioning on the G5 Line Access GatewayLearn how to monitor and troubleshoot the G5 Line Access GatewayPrerequisite Skills:Basic Understanding of TDM or IP TheoryBasic Unix or Linux commands.Prerequisite Courses:N/AGlobal Training

Course Length and Delivery Method2 Day Leader led(G610) – Universal Media Gateway Basic OverviewCourse Description:The G610 Universal Media Gateway Basic Overview, which is 4 hours in length, willprovide the student with a high level understanding of the G6’s Basic Hardware,Provisioning, Alarms, Events and the Packet Line Gateway. The course is dividedinto six lessons. Each lesson contains a quiz to determine if the user needs toreview any information. At the completion of the course, a final test is presented.The user must achieve an 85% on the final test to pass the course. The G610 BasicOverview is the pre‐requisite to the G6 classes.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G6 Universal MediaGateway ProductKey Topics:Product Architecture• Carrier Class Chassis Design• Carrier Class Redundancy• Carrier Class System Architecture• Carrier Class Central Office Design• Access Gateway Functionality• Low – High Scalability• Universal Media Gateway Interfaces• Anatomy of a G6 – The MidplaneModule Types• System Controller Module (SCM)• SCM2• SCM1 & SCM2 Comparison• Access to Network Module (ANM)Global Training

• GbE1 ANM• GbE2 ANM• GbE ANM – IP Capabilities• GbE2 LACP Implementation• Link Aggregation Modules• OC3 / STM‐1 and DS3 Cards• Telephony Port Modules (TPM)• TPM Functions• SCM1 & STS‐1 / chDS3 TPM• SCM2 & STS‐2 / chDS3 TPM• Module RedundancyPlatform Enabling Multiple Solutions• Class 5 Voice over Broadband• kTrunking Media Gateway• Reverse Media Gateway• Wide Array of Internetworking• Interoperability• Security Summary• Release 10.2 Security Feature EnhancementsGENView EMS Manager• System Integration & Network Elements• Advanced Client / Server Framework• G6 Management – CLI• GENView Benefits• Fault Management• Configuration Management• Performance Management• Security Management• GENView Server Recommendation• GENView Solaris Workstation Recommendation• GENView Windows Workstation RecommendationMaintenance• SCM LEDs• ANM LEDs• DS3 LEDs• OC3 / STM‐1 and GBE ANM LEDs• ANM CIM LEDs• T1 / E1 TPM LEDs• Differentiating Between a TPM1 & a TPM2• T1 / E1 TPM CIM• TPM Redundancy• STS‐1 TPM• Fan Control ModuleGlobal Training

• Power Source• BITS or Composite Clock InstallationCabling• SCM Craft Port Connector• DS3 ANM connectors• OC3 / STM‐1 ANM connectors• GbE ANM connectors• TPM T1 Connector / Pin outs• STS‐1 TPM Connectors• E1 TPM ConnectorsPrerequisite Skills:Basic Windows SkillsBasic Telephony KnowledgePrerequisite Courses:NoneCourse Length and Delivery Method4 hours Self-PacedGlobal Training

(G615) Universal Media Gateway Operations, Administration andMaintenanceCourse Description:This 3-day Leader Led G615 Universal Gateway - Operations, Administration andMaintenance course provides the skills required to perform operational,maintenance,and provisioning tasks on the G6, either via the command line interface (CLI) orGENView. This course also provides the skills required to administer andtroubleshoot the G6. A post course knowledge assessment will be administered onthe last day of class. A minimum score of 85% or better is needed to complete thecourse.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G6 Universal GatewayProduct.Objectives:Upon completion of this course, you will be able to:Understand Cooling MaintenanceUnderstand Cable ManagementUnderstand Basic Gateway ProvisioningUnderstand Basic Provisioning via the CLIUnderstand Running DiagnosticsUnderstand Loopback and ContinuityUnderstand Sigtrace and PM CLI CommandsUnderstand Troubleshooting OverviewUnderstand Troubleshooting With GENViewUnderstand Troubleshooting FaultsUnderstand GPON ApplicationUnderstand Jitter TuningUnderstand Card MaintenanceUnderstand Customer SupportUnderstand NSA UpgradeGlobal Training

Prerequisite Skills:You will also need a Basic Understanding of TDM or IP Theory and should knowbasic Unix or Linux commandsPrerequisite Courses:The G610 Overview is the pre-requisite to the G615 course. The 4 – 6 hour G6Overview course is a self-study, Web Based Training Course. It can be accessedthrough the eLearning system and instructs students through the fundamentals ofthe G6 and introduces them to GENBAND’s G6 and GENView products. Registeringfor the G615 course automatically enrolls you in the G610 Overview. This overviewmust be completed prior to your arrival for the G615 Course. A pre-courseknowledge assessment will be administered on the first day of class to make surethe pre-requisite has been met. A minimum score of 85% or better is required tocontinue on with the G615 Course!Course Length and Delivery Method3-day, Leader Led(G616) Universal Media Gateway Operations, Administration andMaintenance for Packet Line Gateway and Trunk GatewayCourse Description:The G616 is a 3-day, Leader Led, G6 Universal Gateway - Operation, Administration &Maintenance for Packet Line and Trunk Gateway Course that describes and illustrates theability of the G6 to function as a Packet Line Gateway to support physical and logicalinterfaces for the G5 Line Access Gateway and Access Bridging Interface for legacyGENBAND XPM migration. This course will also address the capability of the G6 UniversalGateway to function as a Trunk Gateway in support of ISUP, PRI and CAS trunk circuits.The student is equipped with an understanding of the G6 Hardware, H.248 SoftswitchInterface Virtual Media Gateway, Interface Groups, Fault Management, Security,Performance and C20 Call Session Controller and Gateway Controller associations to supportthe Packet Line Gateway (PLG) and Trunk Gateway (TGW) applications defined on the G6.Global Training

Intended Audience:This course is intended for Service Personnel, Administrators and Maintenancepersonnel who require an understanding of the G6 Universal Gateway deployed withGENBAND C20 Converged Softswitch that provides the G6 Gateway Call Control.Important Note: This course is based on G6 Universal Gatewaydeployment with the GENBAND C20 Softswitch. Customers deployingthe G6 without a C20 should not attend this course; they shouldattend the G615 Course.Key Topics:G6 Universal Gateway Command Line Interface (CLI) and Element ManagementSystem (EMS) to manage and maintain G6 operationsSystem hardware and configuration on the G6 Universal GatewayDescription and illustration of the Interface Groups for PLG and TGWC20 Call Session Controller associations to support G6 PLG and TGW functionsG6 Events and AlarmsEmergency Service Module (ESM) and Emergency Stand Alone (ESA) capabilityG6 Maintenance and Testing capabilitiesObjectives:Upon completion of this course, you will be able to:Provide an Overview of the GENBAND C20 Solution to support G6 Packet LineGateway (PLG) and Trunk Gateway (TGW) applicationsIdentify and describe the G6 Gateway hardware and protection schemesDescribe the navigation and operations of the G6 Command Line Interface (CLI)Describe the navigation and operations of the G6 GenView Element ManagementSystem (EMS)Describe the operation and function of the G6 H.248 Softswitch Interface (SSI)Virtual Media Gateway (VMG) to support Call Control signaling in support of PacketLine Gateway (PLG) and Trunk Gateway (TGW) functionality on the G6 GatewayDescribe the operation and function of GR-303 Interface Groups (IG) to support theG6 PLG application to support the G5 Line Access GatewayDescribe the operation and function of ABI Interface Groups (IG) to support the G6PLG application to support the legacy GENBAND XPM via Access Bridging Interfaces(ABI)Describe the Trunk Gateway (TGW) functionality of the G6 Universal Gateway tosupport Interface Groups (IG); CCS for ISUP or PRI, CAS for CAS-R1.Identify Gateway Controller (GWC) profiles to support G6 PLG and TGWIdentify C20 Tables used in conjunction for PLG and TGW applicationsDescribe the Emergency Service Modules and Emergency Stand Alone capabilities ofthe G6 GatewayGlobal Training

Discussion of G6 Alarm and Event monitoring for Fault clearingUnderstanding G6 Universal Gateway maintenance and testing capabilitiesUnderstanding of G6 and EMS Security managementUnderstanding of performance statistical reports and their operationsPrerequisite Courses:N/ACourse Length and Delivery Method3-day, Leader Led(G910) Media Gateway – Basic OverviewCourse Description:The G910 Media Gateway Basic Overview, which is 4 hours in length, is intended asan overview to theG9 product line, architecture, features, capabilities and physical equipment for theG9 in both Class 4 andClass 5 offices. It is divided into five lessons which provide a basic understanding ofthe components that make up the G9 Media Gateway. After completion of the CBT,a final test is presented. The user must achieve an 85% score or better to achieve apassing grade and credit for completing this course. The user must have a passinggrade to enroll in any other G9 courses.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G9 Media Gateway ProductGlobal Training

Key Topics:Hardware• Provides a basic understanding of the Chassis Design• Provides a basic understanding of the Chassis Cooling• Provides a basic understanding of the Card Layout• Provides a basic understanding of the Front Panel• Provides a basic understanding of the Rear Panel• Provides a basic understanding of the Shelf Interface Unit• Provides a basic understanding of the G9 Gateway ArchitectureMedia Gateway Technology• Provides a System Level Overview• Provides a Product Level Overview• Provide a basic understanding of the G9 Media Gateway• Provide a basic understanding of the G9 Media Gateway SupportedApplications• Provide a basic understanding of the Management of the G9 Media Gateway• Provide a basic understanding of the Control of the G9 Media Gateway• Provide a basic understanding of the Signaling Gateway FunctionalitySignaling Protocols• Provides an overview of the Wireless Protocols• Provides an overview of the Wireline Protocols• Provides an overview of the IP Protocols• Provides an overview of the Control Protocols• Provides an overview of the Management Protocols• Provides an overview of the Signaling Gateway ProtocolsTraffic Flow• Provides a understanding of the wireline voice Traffic Path• Provides a understanding of the TDM Traffic• Provides a understanding of the Packet Traffic• Provides a understanding of the Signaling Traffic• Provides a understanding of the Wireless TrafficProduct Redundancy & Protection• Provides a basic understanding of the Redundancy Design• Provides a basic understanding of the Protection Schemes• Provides a basic understanding of the Card Protection• Provides a basic understanding of the Interface Protection SchemesPrerequisite Skills:Basic understanding of switching and networksGlobal Training

Prerequisite Courses:NoneCourse Length and Delivery Method4 Hours Self Paced(G915) Converged Media Gateway – Operation, Administration andMaintenance – Deployment with Megaco SoftswitchCourse Description:The G915 is a 3-day, Leader Led, G915 Converged Media Gateway - Operation,Administration & Maintenance Course that is geared toward Service Personnel,Administrators and Maintenance personnel who require an understanding of the G9Converged Media Gateway deployed with a Megaco (H.248) Softswitch for GatewayCall Control. The student is equipped with an understanding of the G9 Hardware,Virtual Media Gateway, Fault Management, Security and Performance. This courseis based on the G9 Converged Media Gateway deployed with Megaco (H.248)softswitch Media Gateway Controller (MGC).Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G9 Converged GatewayProduct when deployed with a Megaco Softswitch.Important Note: Customers that deploy the G9 CMG with theGENBAND C3 Gateway Controller should not attend this course;instead they require the C3G915 Course.Key Topics:Global Training

Overview of the Element Management System (EMS) Graphical UserInterface (GUI)System hardware and configuration on the G9 Media GatewayIntroduction to G9 GenView EMSG9 Converged Media Gateway Physical NodeG9 Virtual Media GatewayG9 Signaling Gateway ISDN User Adaptation (IUA)G9 Fault Management and MaintenancePerformance ManagementSystem Status reporting toolsObjectives:Understanding the design, navigation and operations of the Genview EMS inconjunction with the G9 Media GatewayUnderstanding G9 Genview EMS functional areasUnderstand the architecture of the G9 Converged Media GatewayUnderstand Megaco (H.248) Call Control and Signaling Gateway functionalityUnderstanding operation and functionality of Interface, Service and ControlcardsUnderstanding G9 Media Gateway maintenanceDiscussion of G9 Fault monitor and reporting sub-systemSecurity management understandingUnderstanding of performance statistical reports and their operationsUnderstanding of G9 status displays and their meaningCourse Length and Delivery Method3 Day Leader led(C3G915) C3 Media Gateway Controller and G9 Converged Media Gateway– Operation, Administration and MaintenanceCourse Description:The C3G915 is a 5-day, Leader Led - Operation, Administration & MaintenanceCourse is geared toward Service Personnel, Administrators and Maintenancepersonnel who require an understanding of the C3G9 Converged Gateway System.Global Training

The student is equipped with an understanding of hardware, Operating System aswell as software, configuration database, and trunking for the C3/G9 system.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND C3/G9 ProductKey Topics:Overview of the Element Management System (EMS) Graphical UserInterface (GUI)System hardware and software on the G9 gatewaySystem Administration and applicationsEvents and AlarmsSecurityPerformance ManagementAccounting ManagementSystem Status reporting toolsConfiguration DatabaseTrunk DatabaseObjectives: Understanding standard G9 Media Gateway Documentation and usage Understanding basic utilization with the GENBAND C3 Media GatewayController Understanding the design, navigation and operations of the GENView EMS inconjunction with the C3/G9 products Understanding EMS functional areas Understanding Ancillary Equipment used in conjunction with the G9 product Understand the architecture of the G9 Converged Media Gateway Understanding operation and functionality of gateway cards G9 call flow examples Understanding gateway maintenance Discussion of G9 Fault monitor and reporting sub-system Security management understanding Understanding of performance statistical reports and their operations Understanding of G9 status displays and their meaning Call trace operations and execution Call Detail Record retrieval and understanding Create Configuration Database for a variety of interface components Create Physical FacilitiesGlobal Training

Prerequisite Skills:Enrollees are also expected to have a basic understanding of switching andnetworksPrerequisite Courses:G910 Media Gateway Basic OverviewC310 Media Gateway Controller Basic OverviewCourse Length and Delivery Method 5 Day Leader ledC20G915 – G9 Converged Gateway – Operation, Administration andMaintenanceCourse Description:The C20G915 is a 3-day, Leader Led, G9 Converged Gateway - Operation, Administration &Maintenance Course that is geared toward Service Personnel, Administrators andMaintenance personnel who require an understanding of the G9 Converged Gatewaydeployed with a GENBAND C20 Call Session Controller for Gateway Call Control. The studentis equipped with an understanding of the G9 Hardware, Virtual Media Gateway, FaultManagement, Security, Performance and C20 Call Session Controller association for TrunkGroup application and support.Intended Audience:This course is intended for anyone requiring a basic understanding of the Design,Architecture, Features and Capabilities of the GENBAND G9 Converged Gateway Productwhen deployed with a GENBAND C20 Call Session Controller.Important Note: Customers that deploy the G9 CMG with the GENBAND C3 CallSession Controller should not attend this course; instead they require the C3G915Course.Key Topics:Overview of the Element Management System (EMS) Graphical User Interface (GUI)System hardware and configuration on the G9 Converged GatewayGlobal Training

G9, GWC and C20 Trunk Group and Carrier associationsC20 Call Session Controller associations to support G9 Converged GatewaySystem Administration and applicationsEvents and AlarmsSecurityPerformance ManagementSystem Status reporting toolsObjectives:Understanding the design, navigation and operations of the Genview EMS inconjunction with the G9 Converged GatewayUnderstanding G9 Genview EMS functional areasUnderstanding C20 and GWC associations used in conjunction with the G9 ConvergedGatewayUnderstand the architecture of the G9 Converged GatewayUnderstand Megaco (H.248) Call Control of the G9 Converged GatewayUnderstand G9 Signaling Gateway functionality to support IUA and M3UA backhaulUnderstanding operation and functionality of Interface, Service and Control cardsUnderstanding G9 Converged Gateway maintenanceDiscussion of G9 Fault monitor and reporting sub-systemSecurity management understandingUnderstanding of performance statistical reports and their operationsUnderstanding of G9 status displays and their meaningCourse Length and Delivery Method3 Day Leader led(mG9K15) Media Gateway 9000 Fault ManagementCourse Description:This course introduces you to the Media Gateway 9000 (mG9K) as a networkelement in the Succession Universal Access - AAL1 and Universal Access - IPsolution. It provides a general product overview and information related to thebasic operations, and maintenance tasks. It is higly recommended that the studentuse a screen resolution greater than the standard recommended minimum foroptimal viewing.Intended Audience:Maintenance personnelTier I and II support personnelNetwork managersGlobal Training

Key Topics: Introduction to Media Gateway 9000 and Network Topologies MG 9000 Function MG 9000 Hardware MG 9000 Interfaces MG 9000 Element Manager MG 9000 Local Craft Interface MG 9000 Fault Management C20 Tables and Interfaces for the MG 9000 MG9000 Troubleshooting MG9000 SecurityObjectives:Upon completion of this course, you will be able to:Describe how the MG 9000 fits in AAL1, IP AAL5 and IP GigE Carrier VoIPnetworksDifferentiate the major protocols usedIdentify MG 9000 network interface card types and common service cardtypesList three of the primary functions for the MG 9000 in the Carrier VoIPnetworkIllustrate the primary components in the MG 9000 call control hierarchyTrace a call flow through the MG 9000 and other network elements, given aconceptual diagramExplain the Emergency Stand Alone function and the Internodal EmergencyStand Alone featureDescribe various MG 9000 frame and shelf configurations and trace a callthrough the shelf hardwareIdentify the four network interface optionsLog into the MG 9000 Manager GUI and navigate to various viewsAccess the Local Craft Interface (LCI) securely through https and sshDisplay and interpret MG 9000 alarms and logsPerform fault management tasks including a card replacement and a linediagnostic procedureDatafill the LGRPINV, LTCINV, GATEWYINV, SERVRINV, and ESAPXLA tablesidentify various points of failure in a networkNavigate the Integrated Element Management System (IEMS) and identifytroubles from logs and events in the IEMS Review various security aspects implemented on the MG 9000 Complete up to 10 hands-in activitiesPrerequisite Skills:Working knowledge of telephony and packet switched network fundamentalsGlobal Training

Prerequisite Courses:C2011- C20 Solution FundamentalsCourse Length and Delivery Method3 day – Self Paced(mG15K15) Media Gateway 15000 Operations, Administration andConfigurationCourse Description:This course provides knowledge and understanding about the Media Gateway 15000as a Trunk Gateway for voice services in a Carrier Voice over IP (CVoIP) network.The Media Gateway 15000 functions as a Trunk Gateway in either a PacketTrunking-IP (PT-IP) or Universal Access-IP (UA-IP) CVoIP network.This course focuses on the MG 15000 deployment using the Gigabit Ethernet (GigE)for IP Packet Network access.Intended Audience:This course is intended for individuals performing any of the following:network verificationnetwork surveillancenetwork analysisnetwork provisioning support.Also included are technicians or professionals who require a working knowledge ofthe Media Gateway 15000 functionality in Carrier VoIP (UA-IP/PT-IP) networks.Key Topics:OverviewIntroduction to MultiService Switch 15000 Frame and HardwareMultiService Switch 15000 Component Administration SystemMultiService Switch 15000 Node Management AccessMultiService Switch 15000 Provisioning SystemMedia Gateway (MG) 15000 ApplicationMedia Gateway (MG) 15000 IP Network AccessMedia Gateway (MG) 15000 Signaling BackhaulMedia Gateway (MG) 15000 Voice Service capabilitiesMedia Gateway (MG) 15000 DS1/E1 Carrier AssociationsTrunk Maintenance Manager (TMM) and Trunk Data AuditGlobal Training

MSS 15000 Software and Patch download processMSS 15000 Alarms and Hardware TestingData Collection System (DCS) and File System (FS)IP Network Access via ATM AAL5Objectives:Upon completion of this course, you will be able to: Identify the MultiService Switch 15000 service application known as MediaGateway 15000 Identify the role of Media Gateway 15000s in Carrier VoIP (UA-IP/PT-IP)Networks Explain how Media Gateway 15000 functions as a Trunk Gateway Understand different Trunk Group type applications such as; ISUP, PRI,CAS/PTS, V5.2 Identify MultiService Switch (MSS) 15000 hardware to support MG 15000application Understand the MultiService Switch (MSS) 15000 common architecturestructure for services Define ATM NSAP addressing requirements for Media Gateway 15000 Describe IP Addressing for the Media Gateway 15000 Signaling and BearerPath connections Explain and perform Media Gateway 15000 provisioning tasks andconfiguration views Describe the functionality between the C20, Gateway Controllers (GWC) andMedia Gateway 15000 Define Media Gateway 15000 components and operational attributes formonitoring and troubleshooting Perform routine and troubleshooting maintenance activitiesPrerequisite Skills:Familiarity with IP networking conceptsPrerequisite Courses:C2011- C20 Solution FundamentalsCourse Length and Delivery Method4 day – Self PacedGlobal Training

(mG36K15) MG3600 Installation Operations and MaintenanceCourse Description:This course will provide the student with an understanding of installation, planningand engineering, provisioning, operations, maintenance and troubleshootingactivities needed to support the MG3600 in their network.Intended Audience:Anyone responsible for implementing and maintaining the MG3600.Key Topics:OverviewInstallationEngineeringCLI CommandsEMSTrouble ShootingObjectives:Upon the completion of this course, the student will be able to perform thefollowing:Install and commission the MG3600Plan and Engineer the MG3600Learn CLI Command structuresProvision services on the MG3600Maintain the MG3600Trouble shoot fault scenarios on the MG3600Prerequisite Skills:Basic understanding of Voice over IP Networks.Prerequisite Courses:C2011- C20 Solution FundamentalsCourse Length and Delivery Method:2 Days Leader LedGlobal Training