Switch Web GUI Quick Configuration Guide for - Supermicro
Switch Web GUI Quick Configuration Guide for - Supermicro
Switch Web GUI Quick Configuration Guide for - Supermicro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Supermicro</strong> <strong>Switch</strong> <strong>Web</strong> <strong>GUI</strong> <strong>Quick</strong> <strong>Configuration</strong> <strong>Guide</strong>2.9 Saving <strong>Configuration</strong>s<strong>Switch</strong> configurations can be saved on the System Mgmt File Management page.You can save a currently running switch configuration in one of three ways.Save Startup Config – This option saves the current running configuration in local flashwith the file name configured as “startup configuration” file. This configuration will beloaded automatically every time the switch reboots.Save Flash File – This option saves the current running configuration in local flash with auser-specified file name.Save Remotely – This option saves the current running configuration in a remote TFTPserver. For this option you will need to provide the IP address and file name of the TFTPserver.Fig 9: File Management PageRelease: 1.0c 18 / 27
Change language