COLOR VIDEO SOUNDER

More documents

Recommendations

Info

2.11 Menu OperationThe menu, consisting of the main menu and three system menus, contains less often usedfunctions which do not require frequent adjustment.2.11.1 Menu selection1. Set the [MODE] switch in the MENU position.NOISE LIMITEROFF 1 2 3HUE SELECTION1 (1 - 7)GAIN ADJUST 200KHZ0 (-20 - +20)GAIN ADJUST 50KHZ0 (-20 - +20)CLUTTER LEVEL0 * (0 - 3)ZOOM MODE (B. LOCK)M/Z B/L B/Z/ : TO SELECT ITEM, 1/2-/+ : TO SET CONDITION.* A shown whenauto mode isactive.2. To go to page 2 of the main menu, select ZOOM MODE (B. LOCK) with [▼] and then press[▼] again.MARKER (VRM)VRM WHTGO TO SYSTEM MENUNO YES/ : TO SELECT ITEM, 2/2-/+ : TO SET CONDITION.3. To go to the system menu, press [▼] to select GO TO SYSTEM MENU and [+] to select YES.You can switch among system menus by selecting MENU and using [+] or [-].2-10
MENU :DEPTH :SPEED :TEMP :ZOOM MARK :F/A LEVEL :NAV :( * SYSTEM MENU [1] *)[1] [2] [3]m ft fa PBkt MPH KPH° C ° FOFF ONWEAK MED STRGGRPH DATA/ : TO SELECT ITEM.-/+ : TO SET CONDITION.(* SYSTEM MENU [2] *)MENU :NAV DSP :FORMAT :SPD SEL :TMP SEL :TMP GRP:SPD ADJ :TMP ADJ :[1] [2] [3]OFF L/L R/B CSENMEA CIFOFF OWN NMEAOFF OWN NMEAOFF LOW HIGH+0 % [-50 - +50]+0.0 °F [-20 - +20](ADJUSTABLE OWN SENSOR ONLY.)OWN SENSORSPEEDOWN SENSORTEMPERATURE0.0 kt °F/ : TO SELECT ITEM.-/+ : TO SET CONDITION.MENU :RANGE1 :RANGE2 :RANGE3 :RANGE4 :RANGE5 :RANGE6 :RANGE7 :RANGE8 :ZOOM RANGE:B/L RANGE:(* SYSTEM MENU [3] *)[1] [2] [3]15 (10 - 1000)30601202004006001000X2 X3 X4 X510 20/ : TO SELECT ITEM.-/+ : TO SET CONDITION.4. Press [▲] or [▼] to select menu item.5. Press [+] or [-] to set condition.6. Set the [MODE] switch in any other position to register selection and close the menu.2.11.2 Main menu descriptionMenu itemNOISE LIMITERHUE SELECTIONGAIN ADJUST (50kHZ, 200KHZ)CLUTTER LEVELZOOM MODEMARKERGO TO SYSTEM MENUDescriptionEliminates noise from other echo sounders and electricalinterference.Selects colors for echoes and background.Adjusts the gain for both high and low frequencies. Changingthis setting by 10 is equal to changing the GAIN control by 1. Ifthe sensitivity is too low or the auto function does not workproperly when the transducer is installed inside the hull, try toadjust the gain here.Eliminates blue dots, which are mainly caused by uncleanwater, from the screen.Selects the type of zoom display. B/L, Bottom-lock; B/Z,Bottom zoom, and M/Z, Marker zoom.Selects which marker to use; VRM or white marker.Select YES to go to the system menu.2-11
Page 1: COLOR VIDEO SOUNDERFCV-667
Page 4 and 5: TABLE OF CONTENTSINTRODUCTION .....
Page 6 and 7: • Alarms: fish, bottom, water tem
Page 8 and 9: SYSTEM CONFIGURATIONDISPLAY UNITCV-
Page 10 and 11: 1.2 IndicationsSpeed*Noise LimiterW
Page 13 and 14: ZOOM mode (high or low frequency)Th
Page 15 and 16: Enlarging a nav data indicationYou
Page 17 and 18: 2.6 Selecting Picture Advance Speed
Page 19: 2.9 Measuring Depth to a Fish Schoo
Page 23 and 24: 2.12 Suppressing InterferenceInterf
Page 25 and 26: 2.15.2 Activating/deactivating an a
Page 27 and 28: 2.18 Correcting Speed/Water Tempera
Page 29 and 30: 3. INTERPRETING THE DISPLAY3.1 Zero
Page 31 and 32: 4. MAINTENANCE, TROUBLESHOOTINGWARN
Page 33 and 34: 4.2 Basic TroubleshootingThe troubl
Page 35 and 36: 4.4 Transducer CheckA simple and re
Page 37 and 38: MENU TREE[MODE] switch inMENU posit
Page 39 and 40: CIF OutputDepth, Water temperature*
Page 42: FURUNO Authorized Distributor/Deale

COLOR VIDEO SOUNDER

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?