CVP-309/307 - Yamaha

Boost the volume of the part to be practicedOn the CVP, a single Song can contain separate data for up to sixteen MIDI channels. Specify the channel for practicingand increase the playback volume for the channel.1 Select a Song. The method for selecting a Song is the same as “Playing a preset Song (page 34)” or “Playing a Songfrom SmartMedia card (page 35).”2 Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display.3Quick Guide2, 43 Press the TAB [√][®] buttons to select the VOL/VOICE tab.4 Press the [MIXING CONSOLE] button until “MIXING CONSOLE (SONG CH1–8)” is shown at the top of the display.5 Press the [E]/[J] button to select “VOLUME.”6 To raise the level of the desired channel(s), press the appropriate buttons [1π†]–[8π†].If the desired channel is not shown in the MIXING CONSOLE (SONG CH1–8) display, press the [MIXING CON-SOLE] button to call up the MIXING CONSOLE (SONG CH9–16) display.If you don’t know which channel’s volume to raise:• Look at the illustrations of the instruments indicated below “VOICE.”• Look at the channel indicators, which light as the Song plays back. Watching these as you listen can show youwhich channel you wish to boost.36CVP-309/307 Owner’s Manual