Amphenol Solutions Guide.pdf - Military Systems & Technology

SELECTING THE SERIES TO MEET YOUR NEEDS97 SERIESThe 97 series is a durable, cost-effective MIL-DTL-5015available in a variety of shell styles, sizes, contacts, andlayouts. Contacts are silver-plated with pre-tinned soldercups. These circular connectors are excellent for industrialapplications including robotics, machine tools and welding.Features include: Low cost • Solder termination • Wide selectionof shell styles and insert patterns • Solid or split shell construction.AIT/MS SERIESThe MIL-DTL-5015 AIT/MS series is a cost-effective threadedcircular connector for use in harsh environments. TheseAmphenol connectors are sealed to withstand moisture,condensation, vibration and flash-over. Over 286 contactlayouts are available, in variations that allow for just power,just signal, or a mix of both contact types. Available in five mounting styles,nineteen shell sizes, and solder or crimp termination.Features include: Broad temperature range from -67°F to +257°F (-55°Cto +125°C) under extremely harsh conditions. • Rugged aluminum alloy shell• Solder, crimp, PC, Coax and thermocouple contacts available.MS3450 (944*) SERIESThe MIL-DTL-5015 Rear-Release Threaded MS3450Matrix® series uses rear-release crimp contacts withretention clip. These Amphenol connectors fill the gapbetween older MIL-DTL-5015s and the environmentaland higher-performance needs of new technologies. They are sealed towithstand moisture, condensation, vibration and flash-over. Over 165 contactlayouts are available, in variations that allow for just power, just signal, or amix of both contact types.Features include: Broad operating temperatures • Recommendedfor extreme conditions • Rugged shell is highly resistant to damageand corrosion • Wide range of wire gauges and current carrying capacity.62GB SERIESAmphenol’s 62GB series connectors are similar toMIL-DTL-26482 but with the advantage of keywayorientation to reduce mis-mating among multipleconnectors. They feature aluminum shells with brassor stainless steel options available. PEI-Genesis is the largest assembler of62GB connectors in the world.Features include: Rugged, machined connector shell • Environmentallysealed • Resistant to harsh environments • Wide variety of endbell styles.MB SERIES-DTL-26482 SERIES IIAmphenol’s Matrix® MIL-DTL-26482 series II miniaturecylindrical connectors have a quick-mating, three-pointbayonet coupling system. Given their small size andhigh-quality contact retention and seal, the MB series isexcellent for high-reliability applications in the harshest conditions, includingthe aerospace industry.Features include: Total environmental sealing • Wide operating temperaturerange -85°F to +392°F (-65°C to +200°C) • Quick mating, three pointbayonet coupling •100% scoop proof shell design • EMI-RFI shielding, •Available in a rugged 500 hour salt spray plating.LJT MIL-DTL-38999 SERIES I/HE-308Amphenol’s MIL-DTL-38999 series I LJT miniatureconnectors offer high-density contact arrangements andare suitable for extremely high-reliability connections,including use in military and commercial aviation. Theyare environmentally-sealed and have a wide operatingtemperature range.Features include: Very small area for mating the connectors • Totalenvironmental sealing • Wide operating temperature range • Extremely lightweight connector design • Quick mating three point bayonet coupling • Widerange of receptacle styles • Available in a rugged 500 hour salt spray plating.AIB/GT SERIESThe AIB/GT Series replaces the threaded coupling used inMIL-DTL-5015 with a positive, quick-mating, three-pointreverse bayonet lock for improved performance. TheseAmphenol connectors are an ideal cost-effective optionfor applications requiring reliability in harsh environments, and is the worldstandardfor rail, mass transit, and military ground vehicle applications.This series has the same shell dimensions, contact layouts, contacts, andperformance characteristics as the MIL-DTL-5015 threaded connectors;however, the two series do not intermate. They are sealed to withstandmoisture, condensation, vibration and flash-over. Over 180 contact layoutsare available, in variations that allow for just power, just signal, or a mix ofboth contact types.Features include: Simple and fast mating and unmating. • Shock andvibration resistant • Proven reliability • Lightweight yet highly resistant todamage.PT MIL-DTL-26482 SERIES IThe Amphenol MIL-DTL-26482 Series I PT/PT-SE offershigh-density contact arrangements in a circular shell. PToffers solder contacts, PT-SE offers high-performance crimpcontacts, and PT-CE offers a commercial crimp option.These circular connectors provide quick-disconnect bayonet coupling forrapid mating and unmating, and several mounting styles and shell sizes.Features include: Rugged shell • Environmentally sealed• Resistant to military environments • Wide range of wire gaugesand current carrying capability.JT MIL-DTL-38999 SERIES I/HE-308Amphenol’s MIL-DTL-38999 series I LJT miniatureconnectors offer high-density contact arrangements andare suitable for extremely high-reliability connections,including use in military and commercial aviation. Theyare environmentally-sealed and have a wide operatingtemperature range.Features include: Very small area for mating the connectors • Totalenvironmental sealing • Wide operating temperature range • Extremely lightweight connector design • Quick mating three point bayonet coupling • Widerange of receptacle styles • Available in a rugged 500 hour salt spray plating.TV-CTV MIL-DTL-38999 SERIES IIITV-CTV Tri-Start MIL-DTL-38999 Series III connectorshave high-density contact arrangements in a miniaturecircular shell. Originally designed for the high-performancerequirements of military and commercial aircraft, thesecircular connectors are perfect for applications requiring extremely reliableinterconnections. TV’s are quick-mating and environmentally-sealed.Features include: Total environmental sealing • Wide operating temperaturerange • quick mating, triple lead threaded, self-locking coupling •100%scoop proof shell design • EMI-RFI shielding, • Available in a rugged 500hour salt spray plating or 1000 hour salt spray material.2For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support • www.peigenesis.com • sales@peigenesis.com