JJC JR Series Infrared Controller

More documents

Recommendations

Info

1. Both JR Receiver and Transmitter are powered by one CR-2032 battery which is already included in package. 2. Open the battery cover at the back of remote controls. 3. Insert the fresh battery; please ensure the batteries are put into a correct direction. 4. Close the battery cover Wireless Shutter Setup 4
1. Turn off the camera and attach the JR receiver to a compatible camera’s accessory shoe. 2. Remove the remote socket cap from camera body and take out a connecting cord from the box. 3. Connect the connecting cord to the camera body and the remote socket of JR receiver. 4. Turn on the camera and mount the camera on a tripod or place the camera on a stable, level surface. 5. Make sure the Control mode dial on the O section. 6. Use the JR transmitter and point to the JR infrared receiver to enjoy wireless trigger. Instant Shutter 1. Connect the connecting cord to the camera body and receiver remote socket. 2. Shift the Function mode dial to “· “ 3. Press the JR transmitter shutter button for one second. 4. The receiver will take a photo instantly. Delay Shutter* 1. Connect the connecting cord to the camera body and receiver remote socket. 2. Shift the Function mode dial to “·· “ 3. Press the JR transmitter shutter button for one second. 4. The receiver status light will flash. 5. The receiver will take a photo after 2 seconds. Remote Cord Function Setup BLUB � Select the BLUB mode from the camera. *Delay Shutter does not work with Panasonic and Leica cameras. 5
Page 1 and 2: JJC JR Series Infrared Controller T
Page 3: Receiver 3
Page 7 and 8: • Operating temperature: 5 °C to
Page 9 and 10: JR-J compatible with Olympus SP-510

JJC JR Series Infrared Controller

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?