JJC JR Series Infrared Controller

� Connect the connecting cord to the remote socket of camera body and JR transmitter remote
socket.
� Shift the Control mode dial from O to F, camera do the focus.
� Shift the Control mode dial from F to S, camera lock the shutter.
� Shift the Control mode dial from S to O, release the shutter.
Normal Remote Switch Function
1. Connect the connecting cord to the camera body remote socket and JR transmitter remote
socket.
2. Check the Control mode dial on the O section.
3. Turn on the camera.
4. Half press the shutter button for focus, complete press the shutter button for shutter.
For Inbuilt Remote Control Receiver Cameras 1
1. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
2. Turn on the remote control function of camera.
3. Make sure the Function mode dial on the O section and the control mode dial on “· “section.
4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within
+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and press
the shutter button on the transmitter (when using the transmitter outdoors, make sure that the
object is not backlit and that the line of site between the transmitter and the infrared receiver is
not blocked by the lens or other obstacles).
5. How the camera focuses and shoots depends on the option selected for your camera's custom
setting. For further information, check your camera's manual.
6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front
end of the remote control when operating.
Operating range
For JR Transmitter with JR Receiver maximum operating ranges up to 8Meters.
For JR Transmitter with Cameras inbuilt IR receiver maximum operating ranges 3Meters-10Meters 2
Specifications
JR Receiver:
• Battery Type: 1x CR-2032 battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Net Weight Approximately: 26 g
• Dimensions: 50 X39 X 14 mm
JR Transmitter:
• Battery Type: 1x CR-2032 battery.
1 For the cameras compatible with JR transmitter, please check the JR transmitter table.
2 The Operation ranges For CANON camera is about 3meters-5meters. NIKON camera is about 10meters.
6