soundcraft spirit live 4.pdf - Free Pro Audio Schematics

Reconfiguring Aux 2 as a Post Fade SendAux 2 is configured as a PRE FADE send at the factory, butmay be altered to be POST FADE if required by repositioninga link on the Input PCB SC3209 as shown below.INPUT BOARD SC3209J1J2PREPOSTJ1J2L10C28C27R56R54R52R51R50PREPOSTR48To change AUX 2 to POST FADE, remove the PCB from theconsole and carefully unsolder link J1 using the minimum ofheat to avoid the possibility of tracks lifting on the PCB.Replace the link in position J2.This operation should only be carried out by competenttechnicians who possess the necessary soldering skills.Pa g e 28