FELCOM 250 FELCOM 500 - Furuno

5. WEB SOFTWARE• The first service for each group has a P mark, and "---" appears in the [Application]field. The second and subsequent service for each group has an S mark.In the above connection list, Standard IP Packet Data Connection Service isconnected first.• In the [Status] field, "Not connected" changes to "Connected" (displays ingreen).• The display in the [Operation] field changes from "Connect" to "Disconnect".6. Open the desired application software and begin data communication.Applications are not limited to only those marked with the P mark (applicationspreset at section 6.1.5.) You can use any software that appears after the 2nd applicationin the list. For example, in the connection list above, Windows MediaPlayer 32 kbps streaming IP packet communication is shown. All other applicationscan be used except Windows Media Player.How to disconnect from the internetDo the following to disconnect from the internet:1. Click [Main] in the menu bar.2. Click [Data connection]. The [Data connection] screen is displayed.3. Click [Disconnect] for the services to disconnect. When disconnecting, the message"Now disconnecting..." is displayed. When disconnected, the message"***disconnection success." is displayed. (***: Service and application)Note 1: If you disconnect a service marked with a P mark, all other connected serviceswill disconnect.Note 2: If the disconnection fails, "***disconnection failure." is displayed.4. Click the [OK] button to close the message. The [Status] field displays "Not Connected",the [Operation] button shows "Connect".5-19