FELCOM 250 FELCOM 500 - Furuno

More documents

Recommendations

Info

3. SETTINGS FOR HANDSET14. Enter the default gateway (IP address of the router) and press the Enter key.15. Press the key to return to the [Manual set.] menu.16. Press 2 to select the [DNS] menu to show the [DNS obtain] screen.17. Press or to select the method for obtaining the DNS server address.[Static]: Set Primary and Secondary DNS server addresses manually.[DHCP]: Obtain DNS server address automatically from the DHCP server.18. Press the Enter key. Do one of the following depending on selection made at step17.If you select the [static] at step 17, the DNS entry screen appears. Go to step 19.If you select the [DHCP] at step 17, the [Manual set.] screen appears. Go to step24.DNS factory default settings19. With the [DNS (Primary)] field selected, press the Enter key.20. Enter the IP address of the primary DNS server and press the Enter key.21. Press to select the [DNS (Secondary)] field, and press the Enter key.22. Enter the IP address of the secondary DNS Server and press the Enter key.Note: If only the Secondary DNS Server address is entered, the Primary DNS isset to the same value.23. Press the key to return to the [Manual set.] menu.24. Press the key to close the menu.3-16
3.5.3 SIP settings3. SETTINGS FOR HANDSETThis section describes SIP server settings. Do the procedure if it is necessary to enterSIP settings.1. In the [Settings] menu, press 3 to select [SIP] to show the [SIP] menu.2. Press one of keys 1 -5 depending on your objective.1: Set SIP client.2: Set SIP proxy server.3: Set SIP server port number.4: Set SIP server authentication interval.5: Set RTP port.3. Set SIP by referring to the descriptions in the table.Menu Item DescriptionClient set.*1 Phone number Enter extension number (1000 - 9999).Proxyserver *2PasswordNicknameAutomaticManualEnter SIP password. Up to a maximum of eight alphanumericcharacters (upper case alphabet only) can be used. This passwordis for identification at the SIP server.Enter a nickname (maximum of 50 alphabet). The nickname appearson the display of the called extension handset.The IP address (IP address of communication unit) of the SIPproxy server is automatically changed.Enter the address (IP address of communication unit) of the SIPproxy server manually.S/L port Server port Enter server port number (0 - 65535).Local port Enter local port number (0 - 65535).Expire time - Enter expiration time (1800 - 7200 (sec.)).RTP port RTP port 1 Enter RTP port 1 (1024 - 9998, even number only). Set differentfrom RTP port 2.RTP port 2Enter RTP port 2 (1024 - 9998, even number only). Set differentfrom RTP port 1.*1: To change both extension number and SIP password at the [Client set.] menu, youmust also change a setting of the Web software at the SIP server. (See page 6-7.) Thetelephone functions cannot be used if the settings for SIP client and SIP server aredifferent.*2: The IP address of the SIP proxy server must be the same as the IP address of thecommunication unit in order to use the telephone function.3-17
Page 1:
OPERATOR'S MANUALINMARSAT FLEETBROA
Page 4 and 5:
SAFETY INSTRUCTIONSRead these safet
Page 6 and 7:
505 Emergency CallIn the event of a
Page 8 and 9:
TABLE OF CONTENTS3.3 SMS Settings .
Page 10 and 11:
FOREWORDA Word to the Owner of the
Page 12 and 13:
SYSTEM CONFIGURATIONAntenna unitFB-
Page 14 and 15:
SYSTEM CONFIGURATIONThis page is in
Page 16 and 17:
1. BASIC OPERATIONNumber Key Functi
Page 19 and 20:
1. BASIC OPERATION1.3 Power On/OffH
Page 21 and 22:
1. BASIC OPERATIONHandset and web s
Page 23 and 24:
1. BASIC OPERATION3. Press the Ente
Page 25 and 26:
1. BASIC OPERATION7. Press 6 three
Page 27 and 28: 1. BASIC OPERATION4. To delete one
Page 29 and 30: 2. HANDSET OPERATIONS2.1 HandsetYou
Page 31 and 32: 2. HANDSET OPERATIONSHow to place a
Page 33 and 34: 2. HANDSET OPERATIONSSave location
Page 35 and 36: 2. HANDSET OPERATIONSNote 2: If the
Page 37 and 38: 2. HANDSET OPERATIONS8. Press the k
Page 39 and 40: 2. HANDSET OPERATIONS• Delete con
Page 41 and 42: 2. HANDSET OPERATIONS2.3 SMSThe Sho
Page 43 and 44: 2. HANDSET OPERATIONS7. Press the k
Page 45 and 46: 2. HANDSET OPERATIONS*1*2Received m
Page 47 and 48: 2. HANDSET OPERATIONS4. To move an
Page 49 and 50: 2. HANDSET OPERATIONS3. Press 3 to
Page 51 and 52: 2.3.7 How to use Draft messages2. H
Page 53 and 54: 2. HANDSET OPERATIONSURL1. Open the
Page 55 and 56: 2. HANDSET OPERATIONSHow to disconn
Page 57 and 58: 2. HANDSET OPERATIONSNote: You rema
Page 59 and 60: 2. HANDSET OPERATIONS2.4.3 Operatio
Page 61 and 62: 2. HANDSET OPERATIONSHow to delete
Page 63 and 64: 3. SETTINGS FOR HANDSETThis chapter
Page 65 and 66: 3. SETTINGS FOR HANDSET3.1.2 How to
Page 67 and 68: 3. SETTINGS FOR HANDSET3. Press or
Page 69 and 70: 3. SETTINGS FOR HANDSET3.3.2 How to
Page 71 and 72: 3. SETTINGS FOR HANDSET1. In the [W
Page 73 and 74: 3.5 Individual Settings Menu3. SETT
Page 75 and 76: 3. SETTINGS FOR HANDSET4. To set no
Page 77: 3. SETTINGS FOR HANDSET5. To have s
Page 81 and 82: 3. SETTINGS FOR HANDSET1. In the al
Page 83 and 84: 4. OPTIONAL DEVICES4.1 Analog Telep
Page 85 and 86: 5. WEB SOFTWAREAdjust the Communica
Page 87 and 88: 5. WEB SOFTWARESystem message areaE
Page 89 and 90: 5. WEB SOFTWAREItemData connectionD
Page 91 and 92: 5. WEB SOFTWARE5.4.2 How to arrange
Page 93 and 94: 5. WEB SOFTWARE5.5 SMS (Short Messa
Page 95 and 96: 5. WEB SOFTWARE5.5.3 How to review
Page 97 and 98: 5. WEB SOFTWARE2. Click [Recycle bi
Page 99 and 100: 5.5.6 How to use the Draft boxYou c
Page 101 and 102: 5. WEB SOFTWARE5.6 Data ConnectionT
Page 103 and 104: 5. WEB SOFTWARE• The first servic
Page 105 and 106: 5. WEB SOFTWARE5.8 Manual Satellite
Page 107 and 108: 5. WEB SOFTWARE5.9 Login DisplaysYo
Page 109 and 110: 5. WEB SOFTWARE5.9.3 How to view th
Page 111 and 112: 5. WEB SOFTWARE2) To search by date
Page 113 and 114: 5.9.6 How to forward the log to a P
Page 115 and 116: 6. WEB FUNCTIONSThis chapter covers
Page 117 and 118: 6. WEB FUNCTIONS8. Click the [Apply
Page 119 and 120: 6. WEB FUNCTIONS9. Click the [OK] b
Page 121 and 122: 6. WEB FUNCTIONSHow to delete exten
Page 123 and 124: 6. WEB FUNCTIONS6.1.4 LAN settingsT
Page 125 and 126: 6. WEB FUNCTIONSItemMAC addressIP a
Page 127 and 128: 6. WEB FUNCTIONSRIP settingsClick [
Page 129 and 130:
6. WEB FUNCTIONSEntry screenItemDes
Page 131 and 132:
6. WEB FUNCTIONSGroup setting scree
Page 133 and 134:
6. WEB FUNCTIONSGroup setting scree
Page 135 and 136:
6. WEB FUNCTIONSEntry screen/Edit s
Page 137 and 138:
6. WEB FUNCTIONSVPN pass-through sc
Page 139 and 140:
6. WEB FUNCTIONSItemUsername for PP
Page 141 and 142:
6. WEB FUNCTIONSItemDescriptionIP a
Page 143 and 144:
6. WEB FUNCTIONSItemDescriptionDire
Page 145 and 146:
6. WEB FUNCTIONS4. Click the [Next]
Page 147 and 148:
6. WEB FUNCTIONS13. Click the [Next
Page 149 and 150:
6. WEB FUNCTIONS2. Click the [Conne
Page 151 and 152:
6. WEB FUNCTIONS6.2 Device ListAll
Page 153 and 154:
6. WEB FUNCTIONSHow to manually reg
Page 155 and 156:
7. MAINTENANCE AND TROUBLE-SHOOTING
Page 157 and 158:
―○7. MAINTENANCE AND TROUBLESHO
Page 159 and 160:
7. MAINTENANCE AND TROUBLESHOOTINGC
Page 161 and 162:
7. MAINTENANCE AND TROUBLESHOOTING7
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
APPENDIX 1MENU TREEHandset Menu Tre
Page 169 and 170:
APPENDIX 1 MENU TREEWeb Menu TreeMe
Page 171 and 172:
APPENDIX 2 LIST OF TERMS AND ABBREV
Page 173 and 174:
APPENDIX 2 LIST OF TERMS AND ABBREV
Page 175 and 176:
APPENDIX 3 PARTS LIST, ARRANGEMENTP
Page 177 and 178:
APPENDIX 3 PARTS LIST, ARRANGEMENTH
Page 179 and 180:
FURUNO FELCOM 250/500SPECIFICATIONS
Page 181 and 182:
INDEXAAdministrator passwordchangin
show all

FELCOM 250 FELCOM 500 - Furuno

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?