MIRCOM EMERGENCY CALL SYSTEMS EC-Series - Secutron

MIRCOMEMERGENCY CALL SYSTEMSEC-SeriesEmergency Nurse Call SystemFeatures• UL 1069 Listed• Multiple Audible/Visual Alarm StatesThree alarm conditions are available on the EC-300system; fast, slow and steady. Each can beprogrammed for distinguishing calls for Emergency,Normal Patient calls or Door Alarm.• Remote Duty StationsRemote Duty Stations may be added to thesystem to provide signal silence and remote alarmannunciation.• Subsequent AlarmUsing Summit’s EC-103 Pull Cord Stations, itis possible to silence an alarm call and havesubsequent alarms re-trigger the audible alarm.• Dry Alarm ContractsDry Contacts are available for central peripheralalarm devices.• Remote Signalling and Control OutputsConnections can be made to the central controlunit to remotely annunciate alarm calls and initiatesignal silence.• Modular DesignEasily expandible, the EC-300 system uses addonannunciator panels. The modular constructioneasily facilitates custom applications.DescriptionThe EC-300 system fulfils the demands of modernhealth care facilities. The simple operation of Summit’sEC-300 makes it easy to use without the need forextensive training.A basic system consists of patient calling stations,emergency calling stations, a central nurse station,dome lights with possible central corridor horns andduty stations.Emergency calls are placed from designatedEC-103/115 Pull/Push Cord stations which aredistinctly identified by the flashing suite dome light andcentral annunciator suite LED. The Central Nurse’sstation will sound a fast pulsing alert tone and triggerany corridor horns that are connected.All tones may be silenced but the alarm can only bereset from the station that initiated the call. If the nursefails to respond to the call within a preset period, thetones will re-initiate.Normal calls are placed from a Call Station which aredistinctly identified by the slow flashing suite domelight and central annunciator LED. Similar silencingcapabilities for emergency calls are provided for normalcalls.When duty stations are used, the system may beremotely silenced and monitored for alarm calls.E200159Issue 1 SECUTRON INC.Page 1 of 2Canada 25 Interchange Way, Vaughan (Toronto), Ontario L4K 5W3 Telephone: (905) 695-3545 Fax: (905) 660-4113 • Web Page: www.secutron.comU.S.A. 4575 Witmer Industrial Estates, Niagara Falls, NY 14305 Telephone: (888) 695-3545 Fax: (888) 660-4113 • E-mail: mail@secutron.comCatalog Number 6007 • Not to be used for installation purposes.

The EC-300 System is the most economical, multi-state call system. The system incorporates LED annunciatorpanels, pull/push cord stations, corridor lights, and duty stations. All these components provide the commonfeatures and functions most nurses and administrators feel are necessary.EC-300TB 1S1S2Z1Z2RTRRRATRIGL18 OHMSREMOTE SPEAKER500mWOUTP UTC.N.O. DRYN.O. CONTACT24VDC @ 3AREMOTE BUZZER 24VDC @ 80mA MAX.REMOTE SIGNAL SILENCEREMOTE LAMP 24VDC @ 80mA MAXEC-220A/240A ANNUNCIATORL1X1SU ITE AEC-100 ROOMSTATIO NWHT.SU ITE BEC-100 ROOMSTATIONWHT.X2GRN.BLK.GRN.BLK.X3EC-104/ EC-140DOME LIGHTEC-104/ EC-140DOME LIGHTFL1FL2FL3FL4TB 2SLOWFLAS HFASTFLASH* BLK/BLK * BLK/BLK*WHT/RED*WHT/REDTO ALLOTHERSU ITEUNITS2 COMMON1 SELECTIVEPER SUIT E++__STEADYLINE 1SELECT THE REQUIRED FLASH RATENOTE 1T1T218AWG24VAC120VACTRANSFORMERNOTE 3Single State AlarmThe wiring diagram illustrates a typical single state alarm system. A call placed from an EC-100 Pull Cord Stationwill trigger an audible and visual alarm. Selecting the appropriate terminals on the EC-300 will provide fast orslow flashing alarm conditions. Resetting all alarm calls can only be accomplished at the point of activation. Amomentary silence button is provided on the EC-300 to silence all audible devices.EC-300TB1S1S2Z1Z2RTRRRATRIGL1C.N.O.L1REMOTE SPEAKERN.O. DRYCONTACT24VDC @ 3AREMOTE SIGNAL SILENCEREMOTE BUZZER 24VDC @ 80mA MAX.REMOTE LAMP 24VDC @ 80mA MAXEC-220A/240A ANNUNCIATORX18 OHMS500mWOUTPUTWHT.NORMAL CALLEC-100 ROOMSTATIONSUITE ATYPICALEMERGENCY CALLEC-100 ROOMSTATIONWHT.X2GRN.BLK.GRN.BLK.EC-104/ EC-140DOME LIGHTTB2FL1FL2FL3SLOW FLASHFAST FLASH* BLK/BLK*WHT/REDFL4++__T1T218AWG24VAC120VACTRANSFORMERNOTE 2TO ALLOTHERSUITEUNITS3 COMMON1 SELECTIVEPER SUITEDual State Subsequent AlarmThe wiring diagram illustrates a typical dual state alarm system with subsequent alarm capability. An alarminitiated from an EC-103 pull cord station designated as a ‘normal’ station shall pulse a slow audible and visualsignal. An EC-103 Pull Cord station designated as an ‘emergency’ station shall pulse a fast audible and visualsignal. Alarms silenced at the EC-300 shall be re-initiated upon receiving a subsequent call. Only the audiblesignals can be silenced. All visual indicators shall remain until the initiating pull cord station is reset. Further visualaids can be added to change all emergency calls to flash a red dome corridor lamp (see factory for details).Page 2 of 2 SECUTRON INC.Catalog Number 6007 • Not to be used for installation purposes.Issue 1Secutron reserves the right to make changes at any time without notice in prices, colors, materials, components, equipment, specifications and models and also to discontinue models.Modul-R ® is a trademark of Secutron Inc.ISO 9001: 2000REGISTERED