ADK Sensor Kit Shield - TinkerKit Mega Sensor Shield V.2 - Elfa
ADK Sensor Kit Shield - TinkerKit Mega Sensor Shield V.2 - Elfa
ADK Sensor Kit Shield - TinkerKit Mega Sensor Shield V.2 - Elfa
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
_____________________________________________________________________________20 cm long wires for the Tinker<strong>Kit</strong> with a 3 pin jumper on both sides50 cm long wires for the Tinker<strong>Kit</strong> with a 3 pin jumper on both sides.100 cm long wires for the Tinker<strong>Kit</strong> with a 3 pin jumper on both sides_____________________________________________________________________________Arduino <strong>ADK</strong> Rev3Code: A000069The Arduino <strong>ADK</strong> R3 is a microcontroller board based on theATmega2560 (datasheet). It has a USB host interface to connect withAndroid based phones.It is compatible with Android's Accessory Development <strong>Kit</strong> examples. Ithas 54 digital input/output pins (of which 14 can be used as PWMoutputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHzcrystal oscillator, a USB connection, a power jack, an ICSP header, anda reset button.The <strong>ADK</strong> is based on the <strong>Mega</strong> 2560. Plus it has an USB Host circuit thatenable this board to communicate with USB Devices, and give them