IC-F3000/F4000 Series Instruction Manual - Icom France

More documents

Recommendations

Info

6 OPTIONS■■ VOX function (continued)DDTurning the VOX function ON or OFFThe VOX function can be turned ON or OFF when turning the transceiverpower ON.qqRotate [VOL] to turn OFF thetransceiver power.wwSet [ROTARY SELECTOR] toany channel other than Channel16.eeWhile holding down [Upper],turn ON the transceiver powerto switch the VOX function ONor OFF.• 1 beep sounds when the VOXfunction is turned OFF.• 2 beeps sound when the VOXfunction is turned ON.[ROTARY SELECTOR][VOL][PTT][Upper]NOTE: This operation may not be available, depending on thepreprogramming. Ask your dealer for details.35
OPTIONSDDSetting the VOX gainThe VOX sensitivity level can be adjusted from 1 (minimum) to 10(maximum). Higher values make the VOX function more sensitiveto your voice.✓✓ IMPORTANT!Set the microphone gain before setting the VOX gain. (p. 15)qqConnect the optional HS-94, [ROTARY SELECTOR]HS-95 or HS-97 headset and[VOL]the OPC-2004. (p. 34)wwRotate [VOL] to turn OFF thetransceiver power.eeSet [ROTARY SELECTOR] toChannel 16.rrWhile holding down [PTT] and [PTT][Upper], rotate [VOL] to turn ONthe power and enter the VOX [Upper]gain adjustment mode.[Lower]ttPush [Upper] to increase, orpush [Lower] to decrease theVOX gain while speaking into theoptional headset.• The adjustable range is 1 (minimum) to 10 (maximum).• A beep sounds after pushing [Upper] or [Lower].If the level is set on 1 or 10, an error beep sounds after pushing.Therefore, you can determine the current level setting by the typeof beep that sounds.y Rotate [VOL] to turn OFF the power, then turn ON again to exitthe VOX gain adjustment mode.NOTE: This operation may not be available, depending on thepreprogramming. Ask your dealer for details.6123456789101112131415161718192036
Page 1 and 2: INSTRUCTION MANUALPMR446 TRANSCEIVE
Page 3 and 4: iiCOUNTRY CODE LIST• ISO 3166-1Co
Page 5 and 6: DO NOT use or place the transceiver
Page 7 and 8: 4 BATTERY CHARGING.................
Page 9 and 10: ■■Accessory attachmentsACCESSOR
Page 11 and 12: ACCESSORIESNEVER remove or attach t
Page 14: 2 PANEL DESCRIPTION■■Programmab
Page 17 and 18: OPERATION■■Turning ON the power
Page 19 and 20: ■■Receiving and transmittingOPE
Page 21 and 22: OPERATIONDDTransmitting notes• Tr
Page 23 and 24: ■■Setting the squelch levelOPER
Page 25 and 26: ■■Power save functionOPERATIONT
Page 34 and 35: 4 BATTERY CHARGING■■ Battery ch
Page 36 and 37: 4 BATTERY CHARGING■■ Battery ch
Page 38 and 39: 6 OPTIONSDDBATTERY PACK/CASEBattery
Page 40 and 41: 6 OPTIONSDDOTHER OPTIONS• HM-158L
Page 44 and 45: 7 SPECIFICATIONSDDGeneral• Freque
Page 46 and 47: 8 INDEXAAuto scan function.........
Page 48 and 49: #91 EUR-22, #92 EUR-23< Intended Co

IC-F3000/F4000 Series Instruction Manual - Icom France

Create successful ePaper yourself

Delete template?

Save as template?