IC-F3000/F4000 Series Instruction Manual - Icom France

DO NOT use or place the transceiver in direct sunlight or in areaswith temperatures below –25°C or above +55°C.The basic operations, transmission and reception of the transceiver,are guaranteed within the specified operating temperature range.DO NOT modify the transceiver. The transceiver warranty doesnot cover any problems caused by unauthorized modification.DO NOT use harsh solvents such as benzine or alcohol whencleaning, as they will damage the transceiver surfaces.BE CAREFUL! The transceiver will become hot when operatingit continuously for long periods of time.KEEP the transceiver away from heavy rain, and never immerseit in water. The transceiver meets IP54* requirements for dust-protectionand splash resistance. However, once the transceiver hasbeen dropped, dust-protection and splash resistance cannot beguaranteed because of possible damage to the transceiver’s caseor the waterproof seal.* Only when the battery pack/case and jack cover are attached.MAKE SURE to turn the transceiver power OFF before connectingthe supplied/optional equipment.iv