MCO P1020.34G W CH 1-5 MARINE CORPS UNIFORM ...
MCO P1020.34G W CH 1-5 MARINE CORPS UNIFORM ...
MCO P1020.34G W CH 1-5 MARINE CORPS UNIFORM ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4002<br />
4-12<br />
<strong>MARINE</strong> <strong>CORPS</strong> <strong>UNIFORM</strong> REGULATIONS<br />
(2) The Navy/Marine Corps parachutist insignia is a gold metal pin,<br />
consisting of the basic aviation wings with a gold-colored open parachute<br />
centered on the wings. The parachute is 1/2 inch wide at its widest part and<br />
13/16 inch long from top to bottom.<br />
c. Explosive Ordnance Disposal<br />
(1) The basic EOD insignia is an silver pin consisting of a 1-inch<br />
high shield with a conventional drop bomb, point down, and 4 lightning bolts,<br />
all in front of a laurel leaf wreath 1-3/4 inches wide.<br />
(2) The senior EOD insignia is the same as the basic EOD insignia, but<br />
with a 7/32-inch star on the drop bomb.<br />
(3) The master EOD insignia is the same as the senior EOD insignia<br />
with a star in a laurel wreath above the shield.<br />
d. Diver Insignia<br />
(1) The master diver insignia is a silver pin approximately 1 inch<br />
high and 1-1/4 inches wide, with 2 upright seahorses facing a diving helmet,<br />
and 2 tridents projecting upward and canted outward from the diving helmet's<br />
cover. A double carrick bend is superimposed on the breastplate.<br />
(2) The diving medical technician insignia is same as the master diver<br />
insignia, with a caduceus on the breastplate.<br />
(3) The first class diver insignia is a silver metal pin approximately<br />
1 inch high and 1-inch wide, with a diving helmet surrounded by sea serpents.<br />
(4) The combatant diver insignia is a gold pin approximately 1-inch<br />
and 15/16 inch wide, consisting of wet suit headgear and low profile facemask<br />
with chest mounted breathing apparatus.<br />
(5) The second class diver insignia is a silver metal pin<br />
approximately one inch high and 3/4 inches wide, with a diving helmet and<br />
breastplate.<br />
(6) The SCUBA diver insignia is a silver pin approximately 1-1/16<br />
inches high and 1 inch wide, consisting of wet suit headgear and facemask<br />
with breathing apparatus around the neck.<br />
3. Regulations for Wear<br />
a. Authorized insignia will be worn on the left breast of all service and<br />
dress coats. It may be worn at the individual's option on khaki shirts worn<br />
as the outer garment (with or without ribbons), utility coats or the<br />
maternity work uniform coats. Miniature insignia, one-half regular size,<br />
will be worn on evening dress jackets. Breast insignia will not be worn on<br />
the cloak/cape, AWC, extreme cold weather parka, tanker jacket, field coat or<br />
sweater.