Metric - CMP Products

LLU05

CMPPXSS2K CABLE CONNECTORCABLE GLAND AND CABLE CONNECTION SPECIALISTSPXSS2K Hazardous Location Cable ConnectorCMP Type PXSS2K Class I Division 2 ABCD Cable Connector for use with Non-Armored Marine & Tray Cable(Type TC) and Extra-Hard Usage Cord, providing a compound barrier seal around the cable conductors and anenvironmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I ZoneI, AEx d IIC, Ex d IIC certification. The cable connector provides mechanical cable retention. A combineddetachable spacer and compound tube allows the cable to be easily disconnected from the equipment, formaintenance and change out etc. This feature also facilitates remote make off procedures when the terminationis to be conducted in confined spaces or in areas of restricted access.The PXSS2K cable connector offers Nema 4X and IP68 ingress protection and is supplied in Brass gradeCuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component as standard. ThePXSS2K is also IEC Ex Triple Certified Ex d, Ex e & Ex nR, offering a single solution that can be employed inaccordance with both NEC and IEC codes of installation.TECHNICAL DATATypePXSS2KDesign Specification UL 514B, UL 886, UL 2225, UL 60079-0, UL 60079-1, EN 50262:1999, BS 6121:Part 1:1989ATEX CertificationSIRA06ATEX1097XCode of Protection CategoryATEX II 2 GD Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Equipment Zone 1, Zone 2,Zone 21, & Zone 22 - Gas Groups IIA, IIB, IICLLLCompliance StandardsEN 60079-0:2004, EN 60079-1:2004, EN 60079-7:2003, EN 60079-15:2005,EN 61241-0:2004, EN 61241-1:2004IECEx Approval Number IECEx SIR 06.0044XCode of Protection Category Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Ex d I, Ex e ICompliance StandardsIEC 60079-0:2004, IEC 60079-1:2003, IEC 60079-7:2001, IEC 60079-15:2005-03,IEC 61241-0:2004, IEC 61241-1:2004UL Listing File NumberFLDW.E201187, CYMX.E161256, EBMB.E253914Code of Protection Category Class I, Div 2, ABCD, Class II, Div 2, F & G, Class I, Zone 1, AEx d IIC, AEx e IICompliance StandardsUL514B, UL 886, UL 2225, UL2227CUL Listing File Number FLDW7.E201187, CYMX7.E161256Code of Protection Category Class I, Div 2, ABCD, Class II, Div 2, F & GCompliance StandardsUL514B, UL 886, UL 2225, UL2227GOST R Certificate Number POCC GB. 05.B01912Code of Protection Category Ex d IIC U / Ex e II UCompliance Standards OCTP 52350.0-2005, OCT P 52350.1-2005, OCT P 52350.7-2005GGTN Permit Number PPC 00-18262GOST K Certificate Number KZ.7500052.01.01.00141RoK Permit for Use Number 08-067693Lloyds approval Number 01/00172DNV Approval Number E-6157ABS Approval Number01-LD234401A/1-PDAContinuous Operating Temperature -60°C to +100°CIngress Protection Rating IP66, IP67, IP68Ingress Protection Document 5046 C549JDeluge Protection Compliance DTS01 : 91Deluge Protection Document 5046 C549J-DNEMA RatingNEMA 4XStandard Gland Connector Material Brass With Nickel Plated Entry ComponentAlternative Gland Connector Material Stainless Steel, Nickel Plated Brass, Aluminum.Seal MaterialCMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier CompoundCable TypeNon-Armored Marine & Tray Cable (TC) and Extra-Hard Usage CordSealing TechniqueCMP Displacement SealSealing Area(s)Inner Compound Barrier & Cable Outer JacketOptional AccessoriesAdapter/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, ShroudLLUCABDLLU05EFCable Connector Selection TableCableConnectorSizeAvailable Entry Threads‘C’StandardOptionMinimumThreadLength‘E’DiameterOverConductors‘A’Numberof CoresOverall CableDiameter‘B’Note: *CMP SOLO LSF Halogen Free Shrouds also available. Marine approvals including Lloyds, DNV & ABS are also available from CMP Products. Note: Size 100 is certified to ATEX / IECEx onlyAcrossFlats‘D’AcrossCorners‘D’NominalProtrusionLength‘F’OrderingReference(Metric)#PVCShroudReference*CableConnectorWeight(Ozs)Metric NPT NPT Metric NPT Max Max Min Max Max Max20S/16 M20 1/2” 3/4” 15.0 19.9 12.6 15 3.0 8.7 30.5 33.3 58.5 20S16PXSS2K1RA7 PVC04 5.6820S M20 1/2” 3/4” 15.0 19.9 12.6 15 6.1 11.7 30.5 33.3 58.5 20SPXSS2K1RA7 PVC04 5.6820 M20 1/2” 3/4” 15.0 19.9 12.6 15 6.5 14.0 30.5 33.3 60.5 20PXSS2K1RA7 PVC05 7.0920L M20 1/2” 3/4” 15.0 19.9 12.6 15 10.0 16.0 30.5 33.3 60.5 20LPXSS2K1RA7 PVC05 7.0925 M25 3/4” 1” 15.0 20.2 17.5 29 11.1 20.0 37.5 40.5 67.5 25PXSS2K1RA7 PVC09 11.4432 M32 1” 1-1/4” 15.0 25.0 23.6 51 17.0 26.3 46.0 51.0 69.5 32PXSS2K1RA7 PVC10 15.7532L M32 1” 1-1/4” 15.0 25.0 23.6 51 20.0 27.4 46.0 51.0 69.5 32LPXSS2K1RA7 PVC10 15.7540 M40 1-1/4” 1-1/2” 15.0 25.6 30.0 80 22.0 32.1 55.0 61.0 78.0 40PXSS2K1RA7 PVC13 17.0350S M50 1-1/2” 2” 15.0 26.1 36.6 122 29.5 38.2 60.0 66.5 75.5 50SPXSS2K1RA7 PVC14 17.1750 M50 2” 2-1/2” 15.0 26.9 41.0 149 35.9 44.1 70.0 78.6 80.5 50PXSS2K1RA7 PVC17 17.5963S M63 2” 2-1/2” 15.0 26.9 47.9 205 40.1 50.1 75.0 83.2 91.5 63SPXSS2K1RA7 PVC20 20.0063 M63 2-1/2” 3” 15.0 39.9 53.7 259 47.2 56.0 80.0 89.0 92.0 63PXSS2K1RA7 PVC22 20.7175S M75 2-1/2” 3” 15.0 39.9 59.8 320 52.8 62.0 89.0 101.6 99.0 75SPXSS2K1RA7 PVC24 32.6375 M75 3” 3-1/2” 15.0 41.5 64.3 364 59.1 68.0 99.0 111.1 102.0 75PXSS2K1RA7 PVC26 36.8990 M90 3” 3-1/2” 15.0 41.5 75.3 500 66.6 79.4 114.0 128.6 120.0 90PXSS2K1RA7 PVC31 76.61100 M100 4” - 15.0 44.0 85.6 500 80.0 90.9 133.0 146.0 135.0 100PXSS2K1RA7 150/50HST 89.63All dimensions in millimetersTPC 184 – Issue 1 - 02/09