Imperial - CMP Products

LLU05

CMPPX2KX CABLE CONNECTORCABLE GLAND AND CABLE CONNECTION SPECIALISTSPX2KX Hazardous Location Cable ConnectorCMP Type PX2KX Class I Division 1 ABCD Cable Connector for use with Armored & Jacketed cable providinga compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket. Inaddition this UL listed cable connector also offers Class I Zone I, AEx d IIC, Ex d IIC certification. The cableconnector provides mechanical cable retention and electrical continuity via armor termination. A detachablearmor cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected fromthe equipment, for maintenance and change out etc. This feature also facilitates remote make off procedureswhen the termination is to be conducted in confined spaces or in areas of restricted access.The PX2KX cable connector offers Nema 4X and IP68 ingress protection and is supplied in Brass gradeCuZn39Pb3 (CW614N) to EN12168 with Electroless Nickel Plated Brass entry component as standard. ThePX2KX is also IEC Ex Triple Certified Ex d, Ex e & Ex nR, offering a single solution that can be employed inaccordance with both NEC and IEC codes of installation.TECHNICAL DATATypeDesign SpecificationATEX CertificationCode of Protection CategoryPX2KXUL 514B, UL 886, UL 2225, UL 60079-0, UL 60079-1, EN 50262:1999,BS 6121:Part 1:1989SIRA06ATEX1097X, SIRA07ATEX4326XATEX II 2 GD Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Equipment Zone 1,Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IICLLLCompliance StandardsEN 60079-0:2004, EN 60079-1:2004, EN 60079-7:2003, EN 60079-15:2005,EN 61241-0:2004, EN 61241-1:2004IECEx Approval Number IECEx SIR 06.0044XCode of Protection Category Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66Compliance StandardsIEC 60079-0:2004, IEC 60079-1:2003, IEC 60079-7:2001, IEC 60079-15:2005-03,IEC 61241-0:2004, IEC 61241-1:2004UL Listing File NumberFLDW.E201187, FDJR.E256367Code of Protection Category Class I, Groups A, B, C & D, Class II, Groups E, F & G, Class I, Zone 1, AEx d IICCompliance Standards UL514B, UL886, UL2225, UL 60079-0, UL 60079-1CUL Listing File Number FLDW7.E201187Code of Protection Category Class I, Groups A, B, C & D, Class II, Groups E, F & GCompliance Standards UL514B, UL 886, UL 2225GOST R Certificate Number POCC GB. 05.B01912Code of Protection Category Ex d IIC U / Ex e II UCompliance Standards OCTP 52350.0-2005, OCTP 52350.1-2005, OCT P 52350.7-2005GGTN Permit Number PPC 00-18262GOST K Certificate Number KZ.7500052.01.01.00141RoK Permit for Use Number 08-067693Lloyds Approval Number 01/00172DNV Approval Number E-8119ABS Approval Number01-LD 234401A/1-PDAContinuous Operating Temperature -60°C to +100°CIngress Protection Rating IP66, IP67, IP68Ingress Protection Document 5046 C549GDeluge Protection Compliance DTS01 : 91Deluge Protection Document 5046 C549G-DNEMA RatingNEMA 4XStandard Connector Material Brass With Nickel Plated Entry ComponentAlternative Connector Material Stainless Steel, AluminumSeal MaterialCMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier CompoundCable TypeArmored & JacketedArmor ClampingDetachable Compound Tube / Armor Cone & AnyWay Universal Clamping RingSealing TechniqueUnique CMP "LRS" Outer Seal (Load Retention Seal)Sealing Area(s)Inner Compound Barrier & Cable Outer JacketOptional AccessoriesAdapter/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, ShroudLLUCABDLLU05EFCable Connector Selection TableCableConnectorSizeAvailable Entry Threads‘C’StandardOptionMinimumThreadLength‘E’DiameterOverConductors‘A’NumberofCoresOverallCableDiameter ‘B’Note: *CMP SOLO LSF Halogen Free Shrouds also available. Marine approvals including Lloyds, DNV & ABS are also available from CMP Products. Note: Size 100 is certified to ATEX / IECEx onlyArmorRangeAcrossFlats‘D’AcrossCorners‘D’NPT NPT Metric NPT Metric Max Max Min Max Min Max Max MaxNominalProtrusionLength‘F’OrderingReference(NPT)PVC CableShroud ConnectorReference Weight* (Ozs)20S/16 1/2” 3/4” M20 0.783 0.591 0.496 15 0.240 0.453 0.000 0.039 1.201 1.311 2.303 20S16PX2KX1RA731 PVC06 7.0620S 1/2” 3/4” M20 0.783 0.591 0.496 15 0.374 0.626 0.000 0.039 1.201 1.311 2.303 20SPX2KX1RA731 PVC06 7.0620 1/2” 3/4” M20 0.783 0.591 0.496 15 0.492 0.823 0.000 0.039 1.201 1.311 2.382 20PX2KX1RA731 PVC06 8.1125S 3/4” 1” M25 0.795 0.591 0.689 29 0.551 0.866 0.000 0.039 1.476 1.594 2.657 25SPX2KX1RA732 PVC09 11.6425 3/4” 1” M25 0.795 0.591 0.689 29 0.717 1.031 0.000 0.039 1.476 1.594 2.657 25PX2KX1RA732 PVC09 11.6432 1” 1-1/4” M32 0.984 0.591 0.929 51 0.933 1.335 0.000 0.039 1.811 2.008 2.736 32PX2KX1RA733 PVC11 17.9940 1-1/4” 1-1/2” M40 1.007 0.591 1.181 80 1.098 1.591 0.000 0.039 2.165 2.402 3.071 40PX2KX1RA734 PVC15 25.4050S 1-1/2” 2” M50 1.027 0.591 1.441 122 1.386 1.839 0.000 0.039 2.362 2.618 2.972 50SPX2KX1RA735 PVC18 29.1050 2” 2-1/2” M50 1.059 0.591 1.614 149 1.591 2.091 0.000 0.039 2.756 3.094 3.169 50PX2KX1RA736 PVC21 30.3463S 2” 2-1/2” M63 1.059 0.591 1.886 205 1.795 2.339 0.000 0.039 2.953 3.276 3.602 63SPX2KX1RA736 PVC23 51.1563 2-1/2” 3” M63 1.570 0.591 2.114 259 2.150 2.594 0.000 0.039 3.150 3.504 3.622 63PX2KX1RA737 PVC25 56.4475S 2-1/2” 3” M75 1.570 0.591 2.354 320 2.323 2.839 0.000 0.039 3.504 4.000 3.898 75SPX2KX1RA738 PVC28 81.1375 3” 3-1/2” M75 1.633 0.591 2.531 364 2.626 3.091 0.000 0.039 3.898 4.374 4.016 75PX2KX1RA738 PVC30 107.5990 3” 3-1/2” M90 1.633 0.591 2.965 500 3.000 3.559 0.000 0.063 4.488 5.063 4.724 90PX2KX1RA739 PVC32 176.37100 4” - M100 1.732 0.591 3.370 585 3.389 3.996 0.000 0.063 5.236 5.748 5.135 100PX2KX1RA7310 150/50HST 211.64All dimensions in inchesTPC 177 – Issue 1 - 02/09