1966 Snow Cruiser - Vintage Snow
1966 Snow Cruiser - Vintage Snow
1966 Snow Cruiser - Vintage Snow
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GENERAL MAINTENANCECONTINUEDPROCEDURE FORINSTALLING THETRANSMISSION BELT:1. Loop one end of the replo.cement belt around the prima.rysheaves (Fig. 18).2. Rotate secondary sheaves until one of the flat surfaceson End Cap is adjacent to engine. This will JJermiL belLto pass bet\veen end cap and engine (Fig. 19).3. Move belt between end cap and engine.4. notate large shea-ves until the above mentioned flat spotis a.dja.ecnt to the flat surface on the steering column(Fig. 19).5, Move belt between end cap and steering column.6. Work bottom of belt under and around the two largesheaves as much as possible.7. Spread secondary sheaves with :tands (Figu1·e 19).CAUTION: Do not forcibly pry sheaves apart with tools.6. The secoudar·.v sheaves can be spread by holding thefixed or stationary half next to the mounting pedestal,an