Feeder Protection Relay REF 610 - APE Distribuidor ABB

Feeder Protection RelayREF 6101MRS756295Electromagnetic compatibility testsThe EMC immunity test level meets the requirements listed below:1 MHz burst disturbance test, class III:• Common mode• Differential modeElectrostatic discharge test, class IV:• For contact discharge• For air dischargeRadio frequency interference tests:• Conducted, common mode• Radiated, amplitude-modulated• Radiated, pulse-modulatedFast transient disturbance tests:• Power outputs, energizing inputs, power supply• I/O portsSurge immunity test:• Power outputs, energizing inputs, power supply• I/O portsPower frequency (50 Hz) magnetic fieldAccording to IEC 60255-22-12.5 kV1.0 kVAccording to IEC 61000-4-2,IEC 60255-22-2 and ANSI37.90.3-20018 kV15 kVAccording to IEC 61000-4-6 andIEC 60255-22-6 (2000)10 V (rms), f = 150 kHz...80 MHzAccording to IEC 61000-4-3 andIEC 60255-22-3 (2000)10 V/m (rms), f = 80...1000 MHzAccording to the ENV 50204 andIEC 60255-22-3 (2000)10 V/m, f = 900 MHzAccording to IEC 60255-22-4,and IEC 61000-4-44 kV2 kVAccording to IEC 61000-4-54 kV, line-to-earth, 2 kV, line-toline2 kV, line-to-earth, 1 kV, line-toline300 A/m continuous, accordingto IEC 61000-4-8Voltage dips and short interruptions According to IEC 61000-4-1130%/10 ms60%/100 ms60%/1000 ms>95%/5000 msElectromagnetic emission tests:• Conducted, RF emission (Mains terminal)• Radiated RF emissionCE complianceAccording to the EN 55011EN 55011, class A, IEC 60255-25EN 55011, class A, IEC 60255-25Complies with the EMC directive89/336/EEC and the LV directive73/23/EECABB 11