IP POWER 9280 (POE) User Manual - Openxtra
IP POWER 9280 (POE) User Manual - Openxtra
IP POWER 9280 (POE) User Manual - Openxtra
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>IP</strong> BOOT MANAGER <strong>9280</strong> USERS MANUAL4. SNMP ConfigurationTo use SNMP configurations you will need to correctly input the Manager <strong>IP</strong> Address.5. Change PasswordUse these directions to learn how to change your password back to factory default*In the event that you forget your password. In the login page of the <strong>9280</strong> (<strong>POE</strong>) youcan type in the1.) Open the webpage of the <strong>9280</strong> (<strong>POE</strong>)Login: “super user” (do not type the quotes and there is a space between super anduser)Password: leave blank2.) After you have typed in your login and password hit okay3.) Unplug the <strong>9280</strong> (<strong>POE</strong>)4.) Plug in the <strong>9280</strong> (<strong>POE</strong>) 6. Firmware UpdateIf no firmware to update please do not go to this page.When there a new firmware to update, the user will get additional functions that is created forthe <strong>IP</strong> Boot Manager <strong>9280</strong> (<strong>POE</strong>). Click the firmware update on the right side of the page;and wait for a new window to pop up.Step1: Click the “firmware update” you will see follow webpage:- 18 -
Change language