FOCUS ON ANTERIOR HIGHLIGHTS - DORC

FOCUS ON PRECISIONFOCUS ON INNOVATIONFOCUS ON QUALITYFOCUS ONANTERIOR HIGHLIGHTS

D.O.R.C. International b.v. was establishedto provide ophthalmic surgeons withinstruments and equipment designedspecifically for the demanding needs ofophthalmic surgery. Throughout the last25 years, D.O.R.C. has enjoyed an activecollaboration with surgeons worldwide.This has allowed D.O.R.C. to gain anintimate understanding of the demandsplaced on ophthalmic instruments.Coupling this knowledge with a uniqueblend of design skills, engineering talentand a simple design philosophy has resultedin the development of products whichhave been recognized as truly innovativeand of the highest quality available.D.O.R.C. is proud to offer an extensiveline of products for ophthalmic surgery.These products embody the ultimate inold world craftsmanship while reflectingthe latest in state-of-the-art design.Using only the highest quality materials,all D.O.R.C. products are manufacturedto exacting standards and are subject torigorous quality control measures throughoutthe manufacturing process. D.O.R.C.International b.v. is exporting to morethan 80 countries through an exclusivedistributors network and also has its ownsubsidiary in the U.S.A., France, Germanyand Scandinavia for sales & service.DISPOSABLE OPHTHALMIC KNIVES 3• SLIT KNIVES BEVEL-UP – ANGLED 3• SLIT KNIVES BEVEL-UP – STRAIGHT, BIBEVEL – ANGLED 4• STAB KNIVES 4• CRESCENT KNIFE 4• TRAPEZOID KNIVES 4• CLEAR CORNEAL KNIVES 5• MVR BLADES 5DISPOSABLE CANNULAS 6• ANAESTHETIC CANNULAS – RETROBULBAR – SUBTENON – PERIBULBAR 6• ANTERIOR CHAMBER CANNULAS, MAINTAINER 6• CAPSULOTOMY – IRRIGATING CYSTOTOMES 7• HYDRODISSECTION CANNULAS 7• VISCOELASTIC CANNULAS 7• NUCLEUS REMOVAL CANNULAS 8• CORTEX REMOVAL CANNULA 8• IRRIGATING / ASPIRATING CANNULA 8• CAPSULE POLISHING CANNULAS 8• OCUPLASTIC PRODUCTS 9• REFRACTIVE CANNULA FOR LASIK SURGERY 9• VITREORETINAL CANNULA 9DISPOSABLE ACCESSORIES 10CAPSULORHEXIS INSTRUMENTS 12• MICRO CAPSULORHEXIS FORCEPS – TITANIUM 12• ROUND BODIED CAPSULORHEXIS FORCEPS – TITANIUM 12• FLAT BODIED CAPSULORHEXIS FORCEPS – TITANIUM 12• ERGONOMIC CAPSULORHEXIS FORCEPS 12NEEDLE HOLDERS 12• EXTRA FINE DELICATE JAW NEEDLE HOLDER – TITANIUM 12• ECKARDT COMBINED NEEDLE HOLDER / SCISSORS 12• NEEDLE HOLDERS – STAINLESS STEEL 13SPATULAS & HOOKS 13• SPATULAS & HOOKS – TITANIUM – STAINLESS STEEL 13HOSKIN FORCEPS 14• HOSKIN FORCEPS – TITANIUM 14• HOSKIN COLIBRI FORCEPS – TITANIUM 14TYING FORCEPS 15• FLAT BODIED FORCEPS – STAINLESS STEEL 15• FLAT HANDLE TYING FORCEPS – TITANIUM – STAINLESS STEEL 15• ROUND HANDLE TYING FORCEPS – STAINLESS STEEL 15ANTERIOR SCISSORS 16• IRIS SCISSORS 16• TENOTOMY SCISSORS 16• STRABISMUS SCISSORS 16• CORNEAL SCISSORS 17• WESTCOTT SCISSORS 17• FIXATION FORCEPS 17ANTERIOR MISCELLANEOUS 18• EYE SPECULUM 18CORNEA INSTRUMENTS 19• D.A.L.K. INSTRUMENTS 19• DSEK/DSAEK/DMEK INSTRUMENTS 19DIAMOND KNIVES 20• ANGLED – STRAIGHT DIAMOND KNIVES 20INTRA-OCULAR PRESSURE REDUCER 20PHACO INSTRUMENTS 21• IRRIGATION / ASPIRATION HANDPIECES 21• IRRIGATION CHOPPERS 21• PHACO NEEDLES – HOOKED, SMALL INCISION, FLARE, CHOP NEEDLE 22• PHACO ACCESSORIES 22

DISPOSABLE CATARACT KNIVESTHE D.O.R.C. KNIVES FEATURE THE ULTIMATE SHARPNESS TO CREATE PRECISE AND SMOOTH INCISION.THE D.O.R.C. KNIVES ARE MANUFACTURED TO THE HIGHEST OF STANDARDS WITH “QUALITY YOU CAN FEEL”.SLIT KNIVES BEVEL-UP - ANGLED53.372253.372753.372853.3730SLIT KNIFE 2.2mm,ANGLED, BEVEL UP,(BOX/6, STERILE)SLIT KNIFE 2.7mm,ANGLED, BEVEL UP,(BOX/6, STERILE)SLIT KNIFE 2.8mm,ANGLED, BEVEL UP,(BOX/6, STERILE)SLIT KNIFE 3.0mm,ANGLED, BEVEL UP,(BOX/6, STERILE)53.3732SLIT KNIFE 3.2mm,ANGLED, BEVEL UP,(BOX/6, STERILE)SLIT KNIVES BEVEL-UP - STRAIGHT53.333053.3332SLIT KNIFE 3.0mm,STRAIGHT, BEVEL UP,(BOX/6, STERILE)SLIT KNIFE 3.2mm,STRAIGHT, BEVEL UP,(BOX/6, STERILE)SLIT KNIVES BIBEVEL - ANGLED51.372251.372751.373051.3732SLIT KNIFE, 2.2mm,ANGLED 45°, BIBEVEL(BOX/6, STERILE)SLIT KNIFE, 2.75mm,ANGLED 45°, BIBEVEL(BOX/6, STERILE)SLIT KNIFE, 3.0mm,ANGLED 45°, BIBEVEL(BOX/6, STERILE)SLIT KNIFE, 3.2mm,ANGLED 45°, BIBEVEL(BOX/6, STERILE)3

DISPOSABLE CATARACT KNIVESSTAB KNIVES51.489151.489351.4894NON-RESTRICTEDSTAB KNIFE, TIP 15°,(BOX/6, STERILE)STAB KNIFE, TIP 30°,(BOX/6, STERILE)STAB KNIFE, TIP 45°,(BOX/6, STERILE)51.751451.7531RESTRICTEDSTAB INCISION KNIFE,DEPTH 3.0mm, TIP 15°(BOX/6, STERILE)STAB INCISION KNIFE,DEPTH 3.5mm, TIP 30°(BOX/6, STERILE)CRESCENT KNIFE51.1118CRESCENT KNIFE,2.25mm, 55°, BEVEL UP(BOX/6, STERILE)TRAPEZOID KNIVES53.121453.141653.1520TRAP KNIFE 1.2mm

DISPOSABLE CATARACT KNIVESCLEAR CORNEAL KNIVES54.572554.572654.572754.5728CLEAR CORNEAL KNIFE2.5mm, ANGLED,(BOX/6, STERILE)CLEAR CORNEAL KNIFE2.65mm, ANGLED,(BOX/6, STERILE)CLEAR CORNEAL KNIFE2.75mm, ANGLED,(BOX/6, STERILE)CLEAR CORNEAL KNIFE2.85mm, ANGLED,(BOX/6, STERILE)54.573054.5732CLEAR CORNEAL KNIFE3.0mm, ANGLED,(BOX/6, STERILE)CLEAR CORNEAL KNIFE3.2mm, ANGLED,(BOX/6, STERILE)MVR BLADES52.522051.52301282.D06MVR BLADE 20G,ANGLED,(BOX/6, STERILE)MVR BLADE 20G,STRAIGHT(BOX/6, STERILE)MVR BLADE 23G,ANGLED 45°(BOX/6, STERILE)5

DISPOSABLE CANNULASANAESTHETIC CANNULAS – RETROBULBARRETROBULBAR CANNULA FOR INJECTING ANAESTHETIC INTO THE MUSCLE CONE.52-127552-163752-1638ANAESTHETIC CANNULA RETROBULBAR(25G x 1 1 /2” / 0.5 x 38mm) TRIFACET(BOX/10, STERILE)ANAESTHETIC CANNULA RETROBULBAR -ATKINSON (25G x 1 1 /2” / 0.5 x 38mm)(BOX/10, STERILE)ANAESTHETIC CANNULA RETROBULBAR -ATKINSON (23G x 1 1 /2” / 0.64 x 38mm)(BOX/10, STERILE)ANAESTHETIC CANNULAS –SUBTENONSUBTENON CANNULA FOR INJECTINGANAESTHETIC INTO THE SUBTENON SPACE.ANAESTHETIC CANNULAS –PERIBULBARPERIBULBAR CANNULA FOR INJECTINGANAESTHETIC AROUND THE GLOBE.52-517652-510852-5001ANAESTHETIC SUB TENON CANNULACURVED WITH FLATTENED TIP (19G x 1” /1.1 x 25mm) (BOX/10, STERILE)ANAESTHETIC CANNULA PERIBULBAR -ATKINSON (25G x 1 1 /4” / 0.5 x 32mm)(BOX/10, STERILE)ANAESTHETIC CANNULA PERIBULBAR -ATKINSON (23G x 1 1 /4” / 0.64 x 32mm)(BOX/10, STERILE)ANTERIOR CHAMBER CANNULASFOR MAINTAINING AND FORMING THE ANTERIOR CHAMBER DURING SURGERYBY INJECTING OR REMOVING VISCOELASTIC MATERIALS, BSS OR AIR.ANTERIORCHAMBERMAINTAINER52-127352-128052-5061ANTERIOR CHAMBER CANNULA - RYCROFT(30G x 7/8” / 0.3 x 22mm)(BOX/10, STERILE)ANTERIOR CHAMBER CANNULA - RYCROFT(27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)SELF-RETAINING ANTERIOR CHAMBERMAINTAINER (LEWICKY) (20G x 9/64” /0.9 x 3.5mm) (BOX/5, STERILE)52-163952-1281ANTERIOR CHAMBER CANNULA - RYCROFT(25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)ANTERIOR CHAMBER CANNULA - RYCROFT(21G x 7/8” / 0.81 x 22mm)(BOX/10, STERILE)6

DISPOSABLE CANNULASCAPSULOTOMY – IRRIGATING CYSTOTOMESFOR CAPSULORHEXIS, INTERCAPSULAR / ENDOCAPSULAR AND CAN OPENER CAPSULOTOMY TECHNIQUES.52-504252-161052-1618FORMED IRRIGATING CAPSULORHEXISCYSTOTOME (AXIAL CUTTING EDGE) (27G x5/8” / 0.4 x 16mm) (BOX/10, STERILE)FORMED IRRIGATING CYSTOTOME (90°)(25G x 5/8” / 0.5 x 16mm)(BOX/10, STERILE)FORMED IRRIGATING CYSTOTOME (90°)(27G x 5/8” / 0.4 x 16mm)(BOX/10, STERILE)52-500852-1630FORMED IRRIGATING CYSTOTOME(SHORT CURVE, 8.5mm FROM TIP) (27G x5/8” / 0.4 x 16mm) (BOX/10, STERILE)FORMED IRRIGATING CYSTOTOME (45°)(30G x 5/8” / 0.3 x 16mm)(BOX/10, STERILE)HYDRODISSECTION CANNULASTO DELIVER FLUIDS TO FACILITATE THE SEPARATION OF THE CORTEX FROM THE NUCLEUS AND CAPSULE.52-509952-515552-5037SAUTER NUCLEUS HYDRODISSECTOR(27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)HELSINKI NUCLEUS HYDRODISSECTOR(27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)NUCLEUS HYDRODISSECTOR (ANGLED)(25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)52-510752-5090TAPERED HYDRODELINEATOR(25G x 7/8” / 0.5 x 22mm tapered to0.30mm at the tip) (BOX/10, STERILE)VISCOEXPRESSION (CORYDON)ROUNDED TIP ANGLED 1,8mm FROMEND (25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)VISCOELASTIC CANNULASFOR THE SAFE INTRODUCTION OF VISCOELASTIC.52-500952-2639VISCOELASTIC CANNULA ANGLED AT 45°(23G x 7/8” / 0.64 x 22mm)(BOX/10, STERILE)VISCOELASTIC CANNULA ANGLED AT 45°(25G x 7/8” / 0.64 x 22mm)(BOX/10, STERILE)7

DISPOSABLE CANNULASNUCLEUS REMOVAL CANNULASFOR IRRIGATING AND REMOVING THE NUCLEUS AND THE LARGER PIECES OF CORTICAL DEBRISWHILE MAINTAINING THE ANTERIOR CHAMBER DEPTH.52-159552-161952-5032MICRO IRRIGATING VECTIS 4mm WIDE,SINGLE PORT (27G x 1 1 /2” / 0.4 x 38mm)(BOX/10, STERILE)IRRIGATING VECTIS 5mm WIDE,SINGLE PORT (25G x 1 1 /2” / 0.5 x 38mm)(BOX/10, STERILE)SMALL INCISION IRRIGATING VECTIS 3mmx 2.75mm WIDE, SINGLE PORT (27G x1 1 /2” / 0.4 x 38mm) (BOX/10, STERILE)CORTEX REMOVAL CANNULAFOR ASPIRATING CORTICAL DEBRISWHEN CHAMBER IS MAINTAINED WITHAN ANTERIOR CHAMBER MAINTAINEROR VISCOELASTIC SUBSTANCE.52-5075IRRIGATING / ASPIRATING CANNULAFOR REMOVING CORTICAL DEBRIS ORVISCOELASTIC SUBSTANCES WHILE MAINTAININGTHE ANTERIOR CHAMBER.52-5047CORTEX EXTRACTOR 0.3mm SIDE PORT(23G x 7/8” / 0.64 x 16mm)(BOX/10, STERILE)I/A SIMCOE CANNULA, SHORT PATTERN0.3mm PORT 200mm SILICONE TUBING(23G / 0.64 x 0.64mm) (BOX/5, STERILE)CAPSULE POLISHING CANNULASFOR POLISHING AND CLEANING THE RESIDUAL CORTEX FROM THE CAPSULAR BAG.52-161452-1604CAPSULE POLISHER ANGLED,MICRO ETCHED 5mm FROM END(21G x 7/8” / 0.81 x 22mm)(BOX/10, STERILE)CAPSULE POLISHER KRATZ ANGLED 9mmFROM MICRO ETCHED TIP. ASPIRATIONTHROUGH 0,30mm SIDE PORT (21G x7/8” / 0.81 x 22mm) (BOX/10, STERILE)52-514752-5143OLIVE TIPPED CANNULA (CURVED)(23G x 1” / 0.64 x 25mm)(BOX/10, STERILE)OLIVE TIPPED POLISHER (CURVED)MICRO ETCHED OLIVE TIP(23G x 1” / 0.64 x 25mm)(BOX/10, STERILE)8

DISPOSABLE CANNULASOCUPLASTIC PRODUCTSFOR PROBING AND IRRIGATING THE LACHRYMAL DUCTS.52-127652-5010LACHRYMAL CANNULA CURVED(26G x 1 1 /4” / 0.45 x 32mm)(BOX/10, STERILE)LACHRYMAL INTUBATION SET(23G x 7” / 0.6 x 175mm)(BOX/3, STERILE)REFRACTIVE CANNULA FORLASIK SURGERY52-5250VITREORETINALCANNULA52-5205LASIK IRRIGATING CANNULA (LINDSTROM)(25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)ASPIRATION CANNULA(20G x 1 1 /4” / 0.9 x 32mm)(BOX/10, STERILE)HUB COLOURSALL HUB COLOURS COMPLY WITH ISO-6009YELLOW - 30 GAUGE/ 0.3mm GREY - 27 GAUGE/ 0.4mm BROWN - 26 GAUGE/ 0.45mm ORANGE - 25 GAUGE/ 0.5mmBLUE - 23 GAUGE/ 0.6mm GREEN - 21 GAUGE/ 0.8mm YELLOW - 20 GAUGE/ 0.9mmPATIENT RECORD LABELREF: 52-1275LOT123456 YYYY-MMD.O.R.C. International b.v.Zuidland – The NetherlandsTel: +31 181 4580809

DISPOSABLE ACCESSORIESUNIVERSAL PROCEDURE PACK55.5000• UNIVERSAL PROCEDURE PACK, COST-EFFECTIVE• HIGH QUALITY COMPOSITION• ONLY ONE PACK FOR 90% OF PHACO AND VITRECTOMYPROCEDURES, CONSISTING OF:TABLE DRAPE, PATIENT DRAPE, 2 XL GOWNS WITH 2 TOWELS,2 X 60ml GALLIPOTS, 2 X 5ml SYRINGES, 1 X 3ml SYRINGE,1X EYESHIELD, 1X EYEPAD, 10X GAUZES, 1X DISTEMPER CLAMP,1X TRANSPARENT MAYOCOVER, 1X TRAY• CUSTOMIZATION:A PIGGY-BACK CAN BE SUPPLIED WITH ALL SPECIFIC STERILEITEMS: CANNULAS, KNIVES, DRAIN, TUBING SETS, RETINALPRODUCTS, ETC.40201284-AD1420-DIRIS RETRACTORS (SET/5, STERILE)OSHIO ANTERIOR WIDE FIELD LENS(BOX/5, STERILE)DISPOSABLE CONTACT KERATOSCOPE(BOX/6, STERILE)VBL-10SVBL-10S-USA50-1040UNIVERSAL EYE SHIELD(BOX/50, STERILE)50-1041Vision 0.5 ML SYRINGE(BOX/10, STERILE)Vision 0.5 ML, SYRINGE(BOX/10, STERILE)UNIVERSAL EYE SHIELD(BOX/100, NON-STERILE)10

ANTERIORREUSABLE

CAPSULORHEXIS INSTRUMENTSMICRO CAPSULORHEXIS FORCEPS – TITANIUM50.265MICRO CAPSULORHEXIS FORCEPS, INTRAOCULAR STYLE, 21G SHAFT, 4mm LONG SHANKSROUND BODIED CAPSULORHEXIS FORCEPS – TITANIUM50.251/50.25350.251: CURVED FORCEPS ”UTRATA”, ULTRA FINE GRASPING TIPS, 11mm LONG THIN SHANKS50.253: CURVED FORCEPS “CORYDON”, FINE GRASPING TIPS, 11mm LONG THIN SHANKSFLAT BODIED CAPSULORHEXIS FORCEPS – TITANIUM50.050STRAIGHT FORCEPS “UTRATA”, ULTRA FINE GRASPING TIPS, 11mm LONG THIN SHANKSERGONOMIC CAPSULORHEXIS FORCEPS50.6081ACURVED FORCEPS “UTRATA” WITH VERY DELICATE GRASPING TIPS AND EXTREMELY THIN 11mm LONG VAULTED SHANKSNEEDLE HOLDERSEXTRA FINE DELICATE JAW NEEDLE HOLDER – TITANIUM50.526NEEDLEHOLDER, STRAIGHT, 8mm JAW, WITHOUT LOCKECKARDT COMBINED NEEDLE HOLDER / SCISSORS50.535 50.535ECKARDT COMBINED NEEDLEHOLDER / SCISSORS12

NEEDLE HOLDERSNEEDLE HOLDERS – STAINLESS STEEL50.440550.4575MICRO NEEDLE-HOLDER “BARRAQUER-TROUTMAN”,CURVED, 0.6 x 9mm., WITHOUT LOCK, 9cmMICRO NEEDLEHOLDER “BARRAQUER, CURVED, 1,0 x 10mm,ITHOUT LOCK, 13cm50.4579BMICRO NEEDLEHOLDER “BARRAQUER, CURVED, 0.5 x 9mm,WITHOUT LOCK 12,5cmSPATULAS & HOOKSSPATULAS & HOOKS – TITANIUM50.715PHACO CHOPPER,OFFSET 30º, LEFTSPATULAS & HOOKS – STAINLESS STEEL50.1971A50.198050.193250.1927“SINSKEY” HOOK,ANGLED, EXTRA FINEPISACANO HOOKIOL MANIPULATOR“LESTER”, ANGLED0.25mm TIPPHACO CHOPPER,OFFSET 30º, LEFT50.1977SPATULA BLUNT,1.7mm WIDE13

SPATULAS & HOOKSSPATULAS & HOOKS – STAINLESS STEEL50.1961OTHER STYLES AVAILABLE ON REQUEST.LENS NUCLEUS ROTATOR “JAFFE-BECHERT”, ANGLED50.1998BIRIS SPATULA FOR VITREOUS & SYNECHIA, 10mm50.1972JAFFE SPATULA, 0.5mmHOSKIN FORCEPSHOSKIN FORCEPS – TITANIUM50.919HOSKIN FORCEPS NO.19,NOTCHED, 0.3mm TIPS,0.2mm HOLEHOSKIN FORCEPSHOSKIN COLIBRI FORCEPS – TITANIUM50.922HOSKIN COLIBRIFORCEPS NO. 22,NOTCHED, 0.3mm TIPS,0.2mm SMALL HOLEHOSKIN COLIBRI FORCEPSOTHER STYLES AVAILABLE ON REQUEST.14

TYING FORCEPSFLAT BODIED FORCEPS – STAINLESS STEEL50.313250.3347BONN FORCEPS - 2 TEETH 0.12mm WITH PLATFORMS - 7cmMAC PHERSON TYING FORCEPS, ANGLED50.3349A50.3349BMICRO-TYING FORCEPS “TROUTMAN”, STRAIGHT, VERY DELICATE,WITH 5mm PLATFORM, 9.5cmTROUTMAN TYING FORCEPS, CURVED50.3362ASUTURE FORCEPS “PAUFIQUE” 1x2 TEETH, 0.3mm,45° PLATFORM, 7.5cmFLAT HANDLE TYING FORCEPS – TITANIUMSTRAIGHT FORCEPS50.01150.013TOOTHED FORCEPS“BONN”, 1 x 2 TEETH,0.12mmNOTCHED FORCEPS,6mm PLATFORM,0.3mm TIPSROUND HANDLE TYING FORCEPS – STAINLESS STEELSTRAIGHT FORCEPS50.313650.3329BBONN FORCEPS - ERGO-NOMIC-2 TEETH 0.12mmWITH PLATFORMSCURVED TROUTMANFORCEPSOTHER STYLES AVAILABLE ON REQUEST.15

TYING FORCEPSFLAT HANDLE FORCEPS – STAINLESS STEEL50.3339ACOLIBRI FORCEPS, MICRO CORNEAL FORCEPS “TROUTMAN”, 0.12mm 45° WITH TYING PLATFORMANTERIOR SCISSORSIRIS SCISSORS50.4210.150.4247AIRIS SCISSORS “NOYES”VANNAS SCISSORS, CURVED, LONG BLADESTENOTOMY SCISSORS50.4100TENOTOMY SCISSORS “STEVENS”, STRAIGHT,SHORT MODEL, BLUNT, 10.5cm50.4110TENOTOMY SCISSORS “STEVENS”, CURVED,SHORT MODEL, BLUNT, 10.5cmSTRABISMUS SCISSORS50.4055STRABISMUS SCISSORS, STRAIGHT, 10cmOTHER STYLES AVAILABLE ON REQUEST.16

ANTERIOR SCISSORSCORNEAL SCISSORS50.428550.4286KATZIN SCISSORS, RIGHTKATZIN SCISSORS, LEFTWESTCOTT SCISSORS50.4270WESTCOTT TENOTOMY SCISSORS, BLUNT, 11cmFIXATION FORCEPS50.3245ELSCHNIG FIXATIONFORCEPSOTHER STYLES AVAILABLE ON REQUEST.17

ANTERIOR MISCELLANEOUS50.1140SPATULA “JAEGER”50.2150.0CHALAZION CURETTE“MEYHOEFER”, SHARP, 2.0mm50.2150.1CHALAZION CURETTE“MEYHOEFER”, SHARP, 2.5mm50.2150.2CHALAZION CURETTE“MEYHOEFER”, SHARP, 3.0mm50.2150.3CHALAZION CURETTE“MEYHOEFER”, SHARP, 3.5mm50.263050.3920.2CASTROVIEJO CALIPER, 15mmCHALAZION FORCEPS “DESMARRES”, 26mm, 9cm50.202050.2755SNELLEN LOOPSERREFINE50.270050.2701HAEMOSTATIC FORCEPS “HARTMANN”, STRAIGHT 10cmHAEMOSTATIC FORCEPS “HARTMANN”, CURVED 10cmEYE SPECULUM50.105250.104950.1058A50.1096EYE SPECULUM “LIEBERMANN”,K-WIREEYE SPECULUM “KRATZ-BARRAQUER”, LARGE, HEAVY WIREEYE SPECULUM “BARRAQUER”,ADULT SIZESTANDARD SPECULUM,MEDIUM SIZEOTHER STYLES AVAILABLE ON REQUEST.18

CORNEA INSTRUMENTSD.A.L.K. INSTRUMENTSIN COLLABORATION WITH DR. GERRIT R. J. MELLES, D.O.R.C. DEVELOPED AN INNOVATIVE RANGE OF INSTRUMENTSFOR D.A.L.K., P.L.K. AND DMEK KERATOPLASTY SURGERY.21102111D.A.L.K. SPATULA DISSECTION SETALIOCANTE ALTERNATIVE SUTURE-ENTRY MARKER2114D.A.L.K. / P.L.K. DONOR EYE HOLDERDSEK/DSAEK/DMEK INSTRUMENTSCURVED P.L.K. SCISSORS50.211550.211650.2117CURVED P.L.K. SCISSORS, TYPE 1CURVED P.L.K. SCISSORS, TYPE 2CURVED P.L.K. SCISSORS, TYPE 350.211850.21192114AMELLES P.L.K. SCRAPER, STYLE 1,45° SEMI-SHARP ROUNDED TIPMELLES P.L.K. SCRAPER, STYLE 2,90° SEMI-SHARP ROUNDED TIP50.212DMELLES P.L.K. SCRAPER SET(BOX/2, STERILE)DONOR CORNEA HOLDER50.1971BREVERSED SINSKY HOOK19

DIAMOND KNIVESANGLED DIAMOND KNIVES2205.A2205.B2205.CSLIT KNIFE,90° ANGULATED,DOUBLE BEVEL, BLUNTSIDED, 3.2mm WIDESLIT KNIFE,90° ANGULATED,DOUBLE BEVEL, SHARPSIDED, 3.2mm WIDESLIT KNIFE,90° ANGULATED,DOUBLE BEVEL, SHARPSIDED, 3.0mm WIDE2205.D2205.ESLIT KNIFE,90° ANGULATED,DOUBLE BEVEL, SHARPSIDED, 2.8mm WIDECRESCENT KNIFE,90° ANGULATED,DOUBLE BEVEL, SHARPSIDED, 2.0mm WIDESTRAIGHT DIAMOND KNIVES2205.F2205.G15° SINGLECUTTING EDGE,FOR STEP INCISION,0.95mm WIDE45° SINGLECUTTING EDGE,FOR STEP INCISION,1.0mm WIDEINTRA-OCULAR PRESSURE REDUCER200020

PHACO INSTRUMENTSIRRIGATION / ASPIRATION HANDPIECES1273.EHUNIVERSAL I/A HANDPIECE, EXCL. TIPS1273.EA1273.EPA1273.ESCURVED TIPCURVED TIP WITH SILICONE SLEEVESTRAIGHT TIP1270.BBIMANUAL IRRIGATION/ASPIRATION SETIRRIGATION CHOPPERS1270.C1270.D1270.E1270.FIRRIGATION CHOPPERWITH TWO IRRIGATIONSIDE PORTS, BLUNT TIPIRRIGATION CHOPPERWITH TWO IRRIGATIONSIDE PORTS, BLUNT TIPAND CUTTING EDGEIRRIGATION CHOPPERWITH IRRIGATIONFRONT, BLUNT TIP ANDCUTTING EDGEASPIRATION HANDPIECEWITH ROUGHENEDTIP AND 0,35mmASPIRATION PORTPHACO NEEDLES - HOOKED3005.H09 Ø 0.9mm NEEDLEPHACO NEEDLE HOOKED WITH 0° TIP,Ø 0.9mm INCL. IRRIGATION SLEEVEAND NEEDLE WRENCH (SET/3)3005.H08 Ø 0.8mm NEEDLEPHACO NEEDLE HOOKED WITH 0° TIP,Ø 0.8mm INCL. IRRIGATION SLEEVE ANDNEEDLE WRENCH (SET/3)(BOX/3)21

PHACO INSTRUMENTSPHACO NEEDLES - SMALL INCISION(BOX/3)3005.FDSØ 0.9mm NEEDLEPHACO NEEDLE WITH WHITE SLEEVE 3003-S,SUITABLE FOR DIVIDE AND CONQUER &PHACO CHOP 2.75 - 2.8mmSMALL INCISION. AVAILABLE IN 15°, 30°AND 45° TIP (SET/3)3005.FDMØ 0.8mm NEEDLEPHACO NEEDLE WITH TRANSPARENTSLEEVE 3003-M, SUITABLE FOR DIVIDE ANDCONQUER & PHACO CHOP 2.0 - 2.2mmMICRO INCISION. AVAILABLE IN 30° AND45° TIP (SET/3)PHACO NEEDLES - FLARE(BOX/3)3006.PF530Ø 1.2mm NEEDLEPHACO NEEDLE WITH BLUE SLEEVE 3003SUITABLE FOR HIGH FLOW DIVIDE ANDCONQUER 2.75 - 3.2mm INCISION,Ø 0.9mm SHAFT, INNER DIAMETER OF0.5mm, WITH 30° TIP (SET/3)3006.PF545SAME AS 3006-PF530, WITH 45° TIP (SET/3)3006.PF630Ø 1.2mm NEEDLEPHACO NEEDLE WITH BLUE SLEEVE 3003SUITABLE FOR DIVIDE AND CONQUER2.75 - 3.2mm INCISION, Ø 0.9mmSHAFT, INNER DIAMETER OF 0.6mm,WITH 30° TIP (SET/3)3006.PF645SAME AS 3006-PF630, WITH 45° TIP (SET/3)PHACO CHOP NEEDLE(BOX/3)3006.CHOP Ø 1.2mm NEEDLESLEEVELESS PHACO NEEDLE CONICAL SHAPED SUITABLE FOR BIMANUAL “COOL” PHACOCHOP 2.0 - 2.2mm MICRO INCISION Ø 1.2mm SHAFT INNER DIAMETER OF 0.5mm ZEROANGLE (SET/3)PHACO ACCESSORIES3003BLUE INFUSION SLEEVE FOR3006-PF NEEDLES3003.SWHITE INFUSION SLEEVE FOR3005-FDS NEEDLES3004.WDPHACO NEEDLE WRENCH FOR3005-FDS NEEDLES(STERILE, BOX/6)3007PHACO TEST CHAMBER3003 3003-M 3003-S 3004-WD30073003.MTRANSPARENT INFUSION SLEEVEFOR 3005-FDM NEEDLES22

FOCUS ON KNOWLEDGEFOCUS ON DESIGNFor additional information please contact:D.O.R.C. International B.V.Scheijdelveweg 23214 VN Zuidland, The NetherlandsPhone: +31 181 45 80 80Fax: +31 181 45 80 90E-mail: sales@dorc.euIn US / Canada please contact:In Latin America please contact:In Scandinavia please contact:In France please contact:In Germany please contact:In Middle East please contact:Dutch Ophthalmic USA10 Continental DriveBldg 1, Exeter, NH 03833, U.S.A.Phone: +1 800-75-DUTCH or +1 603-778-6929Fax: +1 603-778-0911E-mail: sales@dutchophthalmicusa.comD.O.R.C. Latin AmericaScheijdelveweg 23214 VN Zuidland, The NetherlandsPhone: +31 181 45 80 80Fax: +31 181 45 80 90E-mail: la-sales@dorc.euD.O.R.C. Scandinavia ABBettorpsgatan 10SE-703 69 Örebro, SwedenPhone: +46 19121514Fax: +46 19188204E-mail: order@dorc.euD.O.R.C. France S.A.R.L.30, Boulevard Pasteur75015 Paris, FrancePhone: +33 1 53 58 14 73Fax: +33 1 53 58 14 75E-mail: ventes@dorc.euD.O.R.C. Deutschland GmbHSchiessstr. 55DE-40549 Düsseldorf, DeutschlandPhone: +49 (0) 211 5229 1580Fax: +49 (0) 211 5229 1585E-mail: bestellung@dorc.euD.O.R.C. Middle East, Africa and IndiaPO BOX 212218, DubaiUnited Arab EmiratesPhone: 00971 509116587Fax: 00971 48857614E-mail: cvds@dorc.euAUTHORIZED D.O.R.C. DEALER0344Version 2013.1 © 2013 D.O.R.C. International b.v. © 2013 Dutch Ophthalmic USA Inc. Specifications are subject to change without notice.