Fluke Networks TS45S ADSL Safe test set users guide - Datacomtools

Return or Repair of EquipmentThe return of any products for credit, other than for warranty service, isdone at the sole discretion of Harris Corporation. Before any product isreturned, including for warranty service, a Return Authorization (“RA”)number must be obtained from the Customer Service Department bycalling (800) 437-2266. If the RA number is not clearly marked on theshipping label, the package will not be accepted by Harris. All authorizedreturns must be shipped, with shipping charges prepaid, fob destination,and addressed as follows:Harris CorporationNetwork Support Division809 Calle PlanoCamarillo, California 93012-8516United States of AmericaAttn: Customer Service, RA# xxxxxSpecificationsTable 5 lists TS45S Test Set specifications.Table 5. SpecificationsParameterWorking LimitsELECTRICALCurrent Range (Off-Hook)10 to 100 mADC ResistanceOff-HookOn-Hook150 Ω nominal>3 MΩAC ImpedanceOff-HookOn-Hook600 Ω nominal; 300-3400 Hz>120 kΩ; 300-3400 HzRotary Dial OutputPulsing Rate10 pps ±1 ppsBreak/Make Ratio 60/40Interdigit IntervalResistance During Break>300 ms>100 kΩ22TS45S Test Set