OWNERS MANUAL - BR250-DN250 Go Kart - Baja Motorsports

CLEANING PROCEDUREA thorough cleaning of your Go-kart is a necessary part of maintenance. It willhelp keep your Go-kart looking and performing best. Proper cleaning can alsoextend the life of your Go-kart.It is important to clean and inspect your Go-kart after every ride, especially ifit is used in mud, brush, grass, water, salt water, or very dusty conditionsThe build-up of mud, brush, grass, etc. especially on the engine and exhaustsystem, can reduce engine cooling ability, conceal damage, or increase wearof certain parts. It is important to remove all debris during cleaning.PREPARATION FOR CLEANINGWash the Go-kart before any mud dries on the Go-kart.Block or seal the end of the exhaust pipe (muffler) and air filter using a pieceof plastic wrap, cloth rag or another method to prevent water from enteringengine.!CAUTIONHigh pressure washers could damage your Go-kart.High pressure washers such as those found at coin-operated carwashes have enough pressure to damage the parts of your Go-kart. Itmay cause rust, corrosion and increase wear.Do not use high pressure washers to clean your Go-kart.44