License Administration Guide - norsar

Chapter 9: lmadmin License Server ManagerUsing lmadmin3. Reconfigure any port where there is a clash:• Use the -licPort argument for the license server port.• Use the -webPort argument for the HTTP port.For example, the following command reconfigures the HTTP port to 8091:lmadmin -webPort 8091When you have reconfigured the HTTP port, you access the license server management interface using thenew port number. So for lmadmin -webPort 8091, connect to the URL, http://:8090.Manually Stopping the License Server ManagerThe allowStopServer command-line argument toggles the presence of the Stop Server button in the lmadminuser interface. The default is the Stop Server button is present. Click the Stop Server button in the Administrationsection of the license server management interface to shut down the license server manager (lmadmin) and allvendor daemons.If lmadmin is started with the command-line argument -allowStopServer no, or if -allowStopServer no was themost recent use of the -allowStopServer argument, you cannot stop the license server using the license servermanagement interface. In this situation, to stop the license server you must stop the lmadmin process.On UNIX systems, you can use the ps utility to identify the process and the kill command to terminate it.Caution • Do not use kill -9, use only kill with its default signal; otherwise, the license server will not shut downcleanly.On Windows systems, you can use the Task Manager to identify the lmadmin.exe process and stop it.You cannot restart the license server from the management interface. You must restart the license server asdescribed in the previous section.Accessing the License Server Management InterfaceThe license server management interface has two modes of operation—Standard mode and Section 508 mode.Either mode is accessible from a supported Web browser. See System Requirements for lmadmin for a list ofsupported Web browsers.1. Make sure that you have started the license server.2. Open the Web browser and browse to one of the following URLs:• Standard mode—This is the standard license server management interface:http://:8090where is the system name where the license server is running.License Administration Guide FNP-11111-LAG01 79