Series 1, 2, 3 and 4 - Powerpipe Systems AB
Series 1, 2, 3 and 4 - Powerpipe Systems AB
Series 1, 2, 3 and 4 - Powerpipe Systems AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SINGLE PIPES B 3:408Valve unit compact<strong>Series</strong> 1, 2, 3 <strong>and</strong> 4HC/CThe valve unit is being used for the bleed orair release.It is built to fit in a st<strong>and</strong>ard well.PN 16/PN25L 2Outlet leftL 1ARTICLE NO 4170, 4270, 4370, 4470DN C-C H H B L1 L2St<strong>and</strong>ard Min[mm] [mm] [mm] [mm] [mm]25 310 480 190 316 550 57040 330 495 200 364 560 60050 360 500 210 398 600 62565 420 505 210 412 610 62580 450 515 225 447 620 700The stem height «H» is available with st<strong>and</strong>ard height or min. height i.a. to the table above.The valve unit can be supplemented with loose stem extensions of 250, 500, 750 or 1000 mm.The outlet pipe is made of stainless steel. The valves are supplied with mount for T-key.The valve is protected by a end cap as a st<strong>and</strong>ard. Please see 8:102This product replaces previous «Valve unit, straight» <strong>and</strong> «Unit Valve, bend»Article no. series 1 Article no. series 24170-DN-000-0004270-DN-000-000Article no. series 3 Article no. series 44370-DN-000-0004470-DN-000-000Outlet 45° right has prefix 032Outlet 45° left has prefix 031.Valve unit with minimal spindle height has mid-prefix = H-min.Outlet leftAn example of how to order:Valve unit, compact, right series 2 dim DN50 has article no. 4270-050-000-031.When ordering a minimum stem height, state as indicated below:Valve unit, compact, right, <strong>Series</strong> 2. DN50 with minimalspindle height has article no. 4270-050-210-031Please observe: the included ball valve has to beoperated at least twice/year in order to ensure agood function.Please observe: Do not refill abovethe sealing.The sealing shall not be belowwater tabe ontinously.Edition 2013
Change language