N11166 ver1.0 Wellwash Versa User Manual - Thermo Scientific
N11166 ver1.0 Wellwash Versa User Manual - Thermo Scientific
N11166 ver1.0 Wellwash Versa User Manual - Thermo Scientific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Venting holes<br />
Liquid containers<br />
and channels<br />
Installation<br />
Installation setups<br />
The <strong>Wellwash</strong> <strong>Versa</strong> includes three standard buffer containers (2 liters)<br />
and a waste container (4 liters). Containers for greater volumes are<br />
available as an option (4 l for buffers and 10 l for waste).<br />
The liquid channels are: A (for Buffer A), B (for Buffer B), R (for<br />
Rinse), and W (for Waste). Channel R is primarily intended for rinsing<br />
and is connected to the RINSE key as the only channel. The Rinse<br />
channel can also be used in wash protocols as the buffer source.<br />
The liquid containers are named and the tubing is color coded to<br />
correspond to the correct buffer source (A = blue, B = yellow, R =<br />
green, and W = colorless) (Figure 3–15). Refer to ”Connection<br />
diagram” on page 28.<br />
Figure 3–15. Waste and liquid containers with liquid level detection sensors<br />
Caution Do not cover the venting holes. ▲<br />
<strong>Thermo</strong> Fisher <strong>Scientific</strong> <strong>Thermo</strong> <strong>Scientific</strong> <strong>Wellwash</strong> <strong>Versa</strong> <strong>User</strong> <strong>Manual</strong> 27