Aerial Ropeways - Environmental Clearance

BIBLIOGRAPHYAmerican National Standard Institute (ANSI). ANSI B77.1 -2006. For Passenger Tramways - AerialTramways, Aerial Lifts, Surface Lifts and Tows:- Safety RequirementsBritish Standard BS 2763:1982. Specification for Round Carbon Steel Wire for Wire Ropes.British Standard BS 5555:1993. Specification for SI Units and Recommendations for the Use ofTheir Multiples and of Certain Other UnitsCode of practice on the design, manufacture and installation of aerial ropeways, Electrical andMechanical Services Division (EMSD), The Government of the Hong Kong Special AdministrativeRegion, 2002 edition (First Revision), pages 1-51.Debasish Basak, "Non-destructive Evaluation of Drive Rope: A Case Study", NondestructiveTesting & Evaluation, Taylor & Francis, UK, Vol. 20, No. 4, December, 2005, pp 221-229.Geotechnical Manual for Slopes, 2nd Edition (1997) Geotechnical Engineering Office of CivilEngineering DepartmentH.R. Weischedel and C.R. Chaplin, "The Inspection of Offshore Wire Ropes: The State of the Art",24 th Annual Offshore Technology Conference (OTC) Houston, Texas, May 4-7, 1992, paper numberOTC 6969, 227-239.Indian Standard : Codes of Practice (various) for the Construction of Aerial Ropeways: IS 5228; IS5229; IS 5230(1969).Ministry of Environment and Forests' EIA Notification New Delhi, the 27 th January 1994 (Asamended up to 14 th Sep 2006), CRZ Notification (19th February 1991 as amended up to August2000). (www.envfor.nic.in)Pollution control Acts, Rules and Notifications issued thereunder (Pollution Control Law Series),CPCB (www.cpcb.nic.in)Administrative Staff College of India, Hyderabad45