HALSTEAD BOILERS FLUE OPTIONS GUIDE.pdf - Abacus Flame

110mm70mm95mm75mm90mm30mm180mm50mmNOTEWhen a vertical flue is installed, theouter section of the standard telescopicflue (supplied with the appliance)must be used in conjunction with aVertical Turret Socket, directly fromthe boiler. The inner telescopic sectionshould be discarded. The Vertical FlueRoof Terminal then fits onto thissection using a Reducer Socket.Extension Ducts may be insertedbetween.**VERTICAL FLUE SYSTEM COMPONENTS•390mm DIA. •FLAT ROOF FLASHINGPart No: 84051240mm40mm767mm• •FLUE EXTENSION DUCTPart No: 955065Useable length: 767mmFlue Options Book152mm••PITCHED ROOFFLASHING•Supplied as part of the118mm DIA. Vertical Flue Kit.• •80mm DIA.• ••••••• •60mm DIA.• •100mm DIA.REDUCER SOCKETSSupplied as part of theVertical Flue Kit.Useable length 70mm• •• •*PLEASE NOTEWhen using a Flue Extension Duct withan Extension Elbow, the ‘flared’ flangewill need to be removed using a hacksawon both inner and outer ducts.•128mm DIA.•FIBRE SEALPart No: 352559Supplied withthe appliance.•90° FLANGED ELBOWPart No: 130596Supplied with theappliance.Seal required.Resistive length: 750mm95mm DIA.•45°••95mm DIA.•45° EXTENSION ELBOWPart No: 954010No Seal required.Resistive length: 375mm75mm• •• •60mm DIA.“O” RING SEALSupplied withthe appliance••450mm SQUARE•••• •118mm DIA.80mm DIA.• •100mm DIA.• •310mm••• ••810-1060mm Max•VERTICAL FLUE ROOF TERMINAL(with Telescopic Outer)Part No: 840506Note: Inner duct may require cuttingVERTICAL FLUE KIT: Part No:988378Comprising Part No’s840506 Vertical Flue Terminal.Pitched Roof Flashing.Reducer Sockets.130606 Vertical Flue TurretSocket.95mm DIA.••• 95mm DIA. •90° EXTENSION ELBOWPart No: 954011No Seal required.Resistive length: 767mm75mm• •••150mm• ••••FLUE DUCT SUPPORTBRACKETPart No: 840517100mm dia, whiteVERTICAL FLUETURRET SOCKETPart No: 130606Supplied as part ofVertical Flue Kit.Useable length1130mmVERTICAL