HALSTEAD BOILERS FLUE OPTIONS GUIDE.pdf - Abacus Flame

More documents

Recommendations

Info

Raised HorizontalA+B=3000mmMaxExtensionElbowFlueExtensionIf the desired outlet point is higher than theappliance, it is possible to raise the fluedirectly from the appliance and then to usethe telescopic flue duct. If necessary thismay be further extended horizontally withextension ducts, 90° or 45° elbows. In thisapplication the 90° flanged elbow suppliedwith the appliance should be discarded anda vertical turret socket used to connectto the appliance.AOuter Section ofTelescopic Flue(supplied withboiler)VerticalTurretSocketACE••••A+B=4655mmMaxA•BFlue ExtensionMaximum raised horizontal flue lengthsvary between appliance types and must befollowed to ensure safe and correctappliance operation as illustrated below.In calculating the flue length thefollowing must be considered:• Each duct has a useable lengthof 767mm• A 90° extension elbow has aresistive length of 767mmA+B=2354mmMaxA•Inner Section - Telescopic Flue(supplied with boiler)BABF LA+B=3812mmMaxU E• A 45° extension elbow has aresistive length of 375mmIn extending the flue ducting it isalso possible to raise or lower thehorizontal ducting. Ducting shouldnot be lowered more than 500mm.Fibre seal and “O” ring aresupplied to seal between theappliance and the flanged elbow.Wall seals are also included toprovide a neat finish on both innerand outer walls.O PT I OBA+B=3045mmMaxN SFINESTAFINESTGOLDBEST db30/40/50/60HORIZONTAL 8RAISEDBEST db 80
30mm50mm95mm DIA.75mmRAISED HORIZONTAL FLUE SYSTEM COMPONENTS•128mm•FIBRE SEALPart No: 352559Supplied with the appliance.75mm• •95mm DIA.••••• • 60mm“O” RING SEALSupplied with the appliance.95mm DIA.• •90° EXTENSION ELBOWPart No: 954011No Seal required.Resistive length: 767mm••100mm DIA.• •VERTICAL FLUETURRET SOCKETPart No: 130606Supplied as part ofVertical Flue Kit.Useable length30mm•••95mm DIA.•45°••45° EXTENSION ELBOWPart No: 954010No Seal required.Resistive length: 375mm••767mm• •FLUE EXTENSION DUCTPart No: 955065. Useable length: 767mm*PLEASE NOTE: When using a Flue Extension Duct with an Extension Elbow, the ‘flared’flange will need to be removed using a hacksaw on both inner and outer ducts.*Adjustable 470-745mm MAXIMUM• •425mm320mm MAXIMUM USEABLE• •TELESCOPIC FLUE ASSEMBLYPart No: 130605Supplied with the appliance.Flue Options BookPLEASE NOTEWhen using a Flue Extension Duct with an ExtensionElbow, the ‘flared’ flange will need to be removed usinga hacksaw on both inner and outer ducts.••INTERNAL & EXTERNALWALL SEALSPart No: 352552 (White Inner)Part No: 352016 (Grey Outer)Supplied with the appliance.RAISEDHORIZONTAL•100mm DIA.•160mm DIA.FLUE DUCT SUPPORT BRACKETPart No: 840517100mm dia, white9
Page 5 and 6: 95mmSE-DUCTAPPLICATIONTELESCOPIC FL
Page 7: 95mm95mm DIA.75mmEXTENDED HORIZONTA
Page 11 and 12: 110mm70mm95mm75mm90mm30mm180mm50mmN
Page 14 and 15: AccessoriesLARGE FLUE SEALExtra lar
Page 16: Halstead Boilers Limited, 20/22 Fir

HALSTEAD BOILERS FLUE OPTIONS GUIDE.pdf - Abacus Flame

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?