elevator shaft mounting instructions - mod. “laquila” - Donzelli Srl

ELEVATOR SHAFT MOUNTING INSTRUCTIONS - MOD. “LAQUILA”Rel. 03 February 2011CROSSBARS• NOTE: Materials required to complete thisstep is supplied in the box code “DZ9F217 –Crossbar and Glass Holder Hardware". Thenumber of kits supplied varies according tothe height of the structure (1 kit = 3 mt inheight).• Identify and separate the front crossbars fromthe side crossbars. For this step, please referto the project drawing to distinguish thedifferent lengths.• Fasten the crossbars to the uprights using thehardware indicated. The crossbars aresupplied with a threaded insert that hasalready been riveted in order to facilitate theassembly of the parts.• The crossbars above and below the landingdoors must always be assembled where the13 x 60 slots are located. These slots allowthe height of the crossbars to be adjusted +/-25 mm (compensation for floor level).PART LIST1 M12 HEXAGONAL INSERT2 Ø12.2 FLAT WASHER3 M12X30 HEX HEAD SCREW1 2 3Donzelli S.r.l. Via Bizzozzero, 106 – 20032 Cormano (MI) Tel. +39 02 66301849 Fax +39 02 6152041 info@donzellisrl.com PAGE 10 / 29