Info | PMI Catalog 2008-2009 (pdf) - Rescue Response Gear

SMC KOOTENAY HX PULLEYThe new Kootenay HX from SMC is the most advanced Knot Passing Pulley on the market. This is anentirely new and more compact design and lives up to its “HX” (High Strength) name as the lightest,strongest, most efficient and durable pulley of its kind available. Sealed ball bearings provide optimalefficiency and help to reduce the performance-robbing resistance that is inherent in most multiple componentsystems. Adding to its versatility, the Kootenay HX may also serve as an edge roller forrope protection.Key Features:Sealed Ball bearings . Solid aluminum side plates . High-strength aluminum sheave . Primary carabinerhole accepts numerous rescue carabiners . Secondary carabiner holes for use with tag or belay lines.Two quick-release pins included for conversion to a high-strength tie off . For use with 10 mm to 12.5mm ropeWeight: 1.8 lbs (816 g)MBS: 38 kN (8,542 lbf)SM125500BERRY COMPLIANTBERRY COMPLIANTSMC SWIFT WATER PULLEYIn recognition of the unique requirements foundin Swift Water Rescue, this aluminum pulleyfeatures a series of holes in the side plates tohelp to minimize any hydroplaning.Key Features:Lightweight aluminum . 2” Aluminum sheave .Sealed bearings . Accepts ropes up to 1/2”Weight: 6 oz (176 g)MBS: 34 kNSM147000SMC TR PULLEYThe TR Pulley is strong, reliable compact and lightweight. It is reasonably priced butdoesn’t sacrifice efficiency. Great performance for its size and cost. The TR Pulley hasa true Oilite Bearing on a zinc-coated axle for reliable performance.Key Features:Lightweight aluminum . 1 1/2” Aluminum sheave . Oilite bearings . Accepts ropes upto 1/2”Weight: 2.5 oz (66 g)MBS: 29 kN (6,519 lbf)SM159500RA/SMC STAINLESS STEEL PULLEYSBased on Russ Anderson’s original design, these pulleys are essential equipment for the serious rigger. Rotating sideplates allow attachment of the pulley anywhere on the rope and the 3” and 4” models will accept multiple carabiners.Axle nuts are marked with a blue witness line to indicate if the axle nut has been turned or tampered with.Key Features:Stainless steel side platesSingle Tread Max Bearing Weight MBS2” NFPA-L 1 1/2” 1/2” Oilite 8.6 oz (252 g) 29 kN (6,519 lbf) SM1500002” NFPA-L 1 1/2” 1/2” Ball 8.7 oz (252 g) 29 kN (6,519 lbf) SM1505003” NFPA-G 2 3/8” 5/8” Oilite 1 lbs (454 g) 51 kN (11,465 lbf) SM1510004” NFPA-G 3 3/8” 5/8” Oilite 1.44 lbs (654 g) 38 kN (8,543lbf) SM1520004” NFPA-G 1 1/2” 1/2” Ball 1.44 lbs (654 g) 38 kN (8,543lbf) SM152500Double Tread Max Bearing Weight MBS2” NFPA-L 3 3/8” 5/8” Oilite 1.01lbs (459g) 41 kN (9,217 lbf) SM1550002” NFPA-L 1 1/2” 1/2” Ball 1.1lbs (499g) 41 kN (9,217 lbf) SM155500N4” NFPA-G 3 3/8” 5/8” Oilite 2.6 lbs (1.185kg) 63 kN (14,163 lbf) SM1570004” NFPA-G 3 3/8” 5/8” Ball 2.9 lbs (1.31kg) 63 kN (14,163 lbf) SM157500NNFPA 1983, G, LBERRY COMPLIANTPulleys 63