Info | PMI Catalog 2008-2009 (pdf) - Rescue Response Gear

RACK FRAMEType #304 stainless steel construction, with a welded eye for extra strength. Each eye weld is inspectedfor dye penetration before shipping. Average tensile of material used is over 10,000 lbf.Key Features:Stainless SteelWeight: 14.5 oz (425.6 g)Straight Eye, 6 Bar CapacitySM1300290° Eye, 6 Bar CapacitySM13502STEEL TIE OFF BARLarge 1” diameter hyper - bar with extension and pin to make locking off easier as well as providingadditional friction when needed. Use as a top bar.Key Features:Stainless SteelWeight: 5 oz (147 g)1” Top Bar SM12301STEEL TOP BAR W/ GROOVEThe 7/8” top bar is designed to stay on your rack and virtually last forever. Has machined groove tokeep the rope centered. Core drill out keeps this bar cool and lightweight. Use only one top bar perrack.Key Features:Stainless SteelWeight: 4.1 oz (120 g)7/8” Top Bar SM11000ALUMINUM TOP BAR7/8” diameter aluminum bar for one of your first or top bars. The extra mass acts as a heat sink andthe training groove helps keep the rope centered in your rack. Use only one top bar per rack.Key Features:AluminumWeight: 2.55 oz (74.8 g)Top BarSM12605STEEL BRAKE BARSAngled slot brake bars formed in a “U” shape. Stainless steel bars will not leave aluminum streaks onyour rope and will last longer than aluminum bars. Available with or without training groove.Key Features:Stainless SteelWeight: 1.7 oz (49.9 g)Brake Bar SM12500Bar w/groove SM12501ALUMINUM BRAKE BARSSolid aluminum give these bars maximum friction and good wear characteristics. Lighter than the stainlessbars and available in a straight slot configuration. 7/8” diameter models fit all SMC racks.Key Features:AluminumWeight: Reg - 2 oz (58.7 g) . Grooved - 1.9 oz (55.8 g)RegSM12201Grooved SM12401Brake Racks 71