Info | PMI Catalog 2008-2009 (pdf) - Rescue Response Gear

PMI CHEST ROLLERThe PMI chest plate and roller combination features a clean design that is efficient and easy to use. The all metal roller incorporates a pivoting gatethat swivels open or locks closed. Getting on and off rope is now an easy one-handed operation with no more dangling parts that could be disconnectedor lost. Both units are especially useful for top heavy or barrel chested users, or for anyone that has a tendency to ‘lean back’ while on rope.Use the second roller to hold the safety in place to assist an “upright posture” even while at rest. Manufactured in the USA by Rock Exotica.Key Features:Multiple connection points fit a variety of harnesses . Secure quick release gate . Aluminum ball bearing rollerSingle RollerDouble RollerWeight: 10.6 oz (300 g) Weight: 13.1 oz (372 g)HD26108HD26109The PMI Chest Roller is designed to be used with an appropriate chest harness, such as the PMI Avatar Circumferential (pg. 39), or the PMI Chest RollerHarness (Below).The roller is a passive point of attachment to help hold the user upright in a rope ascending system. IT IS NOT a grabbing device, ascender, or mainpoint of attachment, and should ONLY be used as a part of a complete system.The single roller model is designed for use with Ropewalker systems, where the mainline runs through the roller. The double roller model is designedfor Mitchell systems where the mainline runs through one side of the roller while the second roller accommodates an upper ascender sling. The unit isambidextrous, and can be mounted either side up for your preferred hand operation.PMI CHEST ROLLER HARNESSA stand alone chest harness for mounting thePMI single or double chest roller assembly.Key Features:Three adjustment points for a snug fit . Extrawide padding on the back . Two sizesWeight: 1.2lb (532g)Standard (30 cm - 40 cm)SG51183Large (40 cm - 50 cm)SG51184 0Rope Grabs 67