Info | PMI Catalog 2008-2009 (pdf) - Rescue Response Gear

SMC ADVANCED HXThe Advance HXTM is designed to assist in the controlled lifting of heavy loads in the demandingconditions often encountered in rope rescue. This type of pulley is most often employed in systemsthat are used to lift and lower live loads in rescue operations. The work of raising a load as part of amechanical advantage system is made much easier and safer by using the Advance HX. Engage thecam and the rope will only travel in one direction... disengage the cam and the Advance HX works asa standard double pulley. Heavy rescue loads are raised by pulling on the tail end of the rope.Key Features:3” double ball bearing . Ropes up to 13 mm . Anodized aluminum side & center platesTread Sheave: 2.5” 3”Weight: 36 kNMBS: 48 oz (703 g)SM154900NNFPA 1983, Gheightec-PMI TM HAUL CAMThe Haul Cam allows attachment of a pulleysystem at any point along a loaded ropecreating an instant mechanical advantage. Anintegral component of ScaffPack TM (pg. 87) andRescuePack TM (pg. 86).Key Features:Stainless steel body . Stainless cam . NylonsheaveWeight: 1.42 lbs (645 g)HD26186PMI/SMC GRIPThis rope grab is a solid, compact performer that can be used as a ratchet or to grip a kernmantlerope whenever reliability and care are priorities. The compact curved body is easy to grip, and thesecure, user friendly release mechanism makes putting this rope grab onto any rope - loaded orunloaded - a breeze. A specially designed cam protects your rope in the event of unexpected loading,but this unit is not designed as a belay or fall protection device.Key Features:Ropes up to 13 mm . Anodized aluminum . CompactWeight: 6.72 oz (191 g)GoldSM220500NMIO ROPE GRABThis highly effective self - trailing rope grab grips automatically in the event of a fall and dissipatesthe energy of the fall by slipping along the rope. When used within OSHA guidelines on approvedropes, the amount of slip is well within the OSHA requirements.Key Features:Meets ANSI requirements . Used for fall arrest . Approved and tested with PMI Classic Static . Removabledual action pin for easy placement on rope . Stainless steel . Self - trailingWeight: 1.38 lbs (672 g)7/16” Rope (Yellow pin) 1/2” Rope (Blue pin) 5/8” Rope (Black pin)HD26114 HD26005 HD2600666 Rope Grabs