Download PDF (2.32 Mb) - Verotec

KM6-II Subracks: Piece partsEnd PlatesUniversal end plates are punched on a 12mm pitch along their length toenable tie bars to be mounted to suit customer applications.On 300mm and deeper versions there is also a pattern of intermediate holesto permit the fixing of a chassis or support system.Identifications are stamped on the end plate to assist in tie bar location.Endplates are sold singly (i.e. 2 required for each subrack).The 4U x 360 and 7U x 420 versions can be assembled as 3U/6U + 2 x ½U or3U/6U + 1U.End plates and end plate anglesEND PLATES3U1 KM6 SubracksOrdering informationDescription: End platesHeight Depth Thickness Qty. Order code240mm 2mm 1 950-2027873U 300mm 2mm 1 950-221911360mm 2mm 1 950-2027904U240mm 2,5mm 1 950-202618360mm 2,5mm 1 950-202620240mm 2mm 1 950-2027886U300mm 2,5mm 1 950-221912360mm 2,5mm 1 950-202791420mm 2,5mm 1 950-2027937U 420mm 2,5mm 1 950-259286240mm 2,5mm 1 950-2027899U300mm 2,5mm 1 950-224197360mm 2,5mm 1 950-202792420mm 2,5mm 1 950-202794Material: 2,0 or 2,5mm Aluminium BS1470 5251-H24 (NS4 H6), conductivefinishPitches at 48mmFor 4U or 7U dimensions add 44,45 to the 3U or 6U height dimensions. 4Uand 7U have a row of holes to suit 3U components.6U9UPIitches at 44,45mmCONDUCTIVE FINISHEnd Plate AnglesOrdering informationDescription: End plate angles Order code Order codeHeight Thickness Qty. With handle holes w/out handle holes3U 2mm 1 950-232632 950-2027834U 2,5mm 1 – 950-2026166U2mm 1 950-232633 950-2027842,5mm 1 950-232635 950-2027857U 2,5mm 1 – 950-2592879U 2,5mm 1 – 950-202786END PLATE ANGLES6U-265,99U-399,2MM3U 132,5Note: 6U angles vary according to end plate thicknessMaterial: Aluminium alloy extrusion BS1474-6063-T6, anodised finishANODISEDUK Tel: +44 (0)2380-246900 sales@verotec.co.ukUSA Tel: 603.821.9921 sales@verotec.us1.29