Download PDF (2.32 Mb) - Verotec

KM6-II Subracks: AccessoriesRear Hinged Connector Mounting PanelThis hinged rear panel provides a means of mounting plugs and sockets, andextends the depth of the subrack by 76,2mm. This extension in depth givessufficent additional space between the backplane and the rear panel to allowwiring to the connectors.Contents of kitDescription Qty. Material/FinishSide plates 2 1,6mm aluminium, conductive clear chromateRear panel 1 1,6mm aluminium, conductive clear chromateAll fixings1 KM6 SubracksOrdering informationDescription: Rear hinged panelHieght Width Order Code3U 84HP 950-202746Rear hinged connector mounting panelFraming KitFor applications such as the addition of an overall rear panel or where a subrackis reverse mounted on a wall or electrical panel, for instance, this kit provides anaesthetically pleasing frame.It is available in three heights, and a standard width of 84HP.Contents of kitDescription Qty. Material/FinishClosing angles 2 BS 1474 HE9TF extrusions conductive clear chromatePlain extrusions 2 BS 1474 HE9TF extrusions conductive clear chromateTapped strips 2 MS zinc and colour passivatedFixing screws 8Ordering informationDescription: Framing kitDimensions Qty. Order code3U x 84HP 1 950-2223316U x 84HP 1 950-2223329U x 84HP 1 950-222333Framing kitConnector Protection PlatesSuitable for 3U/6U subracks, designed to protect connectors and wiringagainst damage. The plates bolt onto pre-drilled positions on the subrackendplates and add 30mm to the overall depth of the subrack.Contents of kitDescription Qty. Material/FinishPlates 2 2,5mm aluminium BS 1470 NS4 1/2Hconductive clear chromateAll fixingsOrdering informationDescription Qty. Order CodeConnector protection plate 2 950-202751Note: It is recommended that two kits are used on 6U frames.Connector protection platesUK Tel: +44 (0)2380-246900 sales@verotec.co.ukUSA Tel: 603.821.9921 sales@verotec.us1.47