Download PDF (2.32 Mb) - Verotec

KM6-II Subracks: Piece partsTop and Bottom Rear Tie Bars –Backplane MountingKM6-II rear tie bars adopt the same positive screw fixing method as thefront ties bars (refer to page 30). Once fitted with a tapped strip andthe appropriate conductive or insulating spacer (to maintain the correctconnector geometry), these tie bars act as supports for the top and bottomof a backplane.Top and bottom rear tie bars are supplied singly.Backplane tie bars can be converted to DIN 41612 by means of a connectormounting frame (see page 34).1 KM6 SubracksContents of kitDescription Qty Material/FinishTie bar 1 Aluminium alloy BS 14746063T6, conductive clearchromateBackplane top and bottom tie barOrdering informationRear Tie Bars Backplane mounting Qty. Order code24HP Top and bottom 1 950-20279742HP Top and bottom 1 950-20273760HP Top and bottom 1 950-20274484HP Top and bottom 1 950-201276For tapped strips and DIN 41612 conversion see Page 34For fixings see Pages 48Backplane top and bottom24HP = 127,442HP = 218,8460HP = 310,2884HP = 432,1237,258,8Mid Rear Tie Bars – Backplane MountingWhen fitted with tapped strips these tie bars are used as mid-rear backplanemountings. They can also be used to fit a 3U backplane into a 6U, or greater,subrack.In order to maintain correct connector geometry it is necessary tofit a spacer, either conductive or insulating, between extrusion andmotherboard/backplane.The centre rear tie bar comprises a two-part extrusion kit and a facility isprovided for fitting a forward facing tapped strip if required.Backplane tie bars can be converted to DIN 41612 by means of a connectormounting frame (see page34).Contents of kitDescription Qty Material/FinishTie bar 1 Aluminium alloy BS 14746063T6, conductive clearchromateBackplane centre rearOrdering informationDescription: Rear Tie Bars - backplane mountingWidth Location Qty. Order code24HP Centre 1 950-20279842HP Centre 1 950-20273860HP Centre 1 950-20274584HP Centre 1 950-20127724 HP = 127,442 HP = 218,8460 HP = 310,2884 HP = 432,12For tapped strips and DIN 41612 conversion see Page 34For fixings see Pages 48Backplane centre rearUK Tel: +44 (0)2380-246900 sales@verotec.co.ukUSA Tel: 603.821.9921 sales@verotec.us1.31