Download PDF (2.32 Mb) - Verotec

KM6-II Subracks: Accessories1 KM6 SubracksKM6-II 6U Front Divider kitsKM6-II, front divider kits can be fitted after assembly of the subracks.For use with 6U subracks, these divider kits provide a useful way to mix 3Uand 6U board heights within a unit. The divider section is available in differentwidths, from 21HP to 84HP, and divides the subrack from either the left handor right hand side.The design of the kit is such that there is no loss of front panel space. Itshould be noted, however, that the divider plate restricts the use of ‘C’type connectors to plug-in units of 4 HP width, or greater, at the positionimmediately to the left of the plate.Contents of kitDescription Qty. Material/FinishFront extrusions 2 Aluminium alloy BS 1474HE9TFconductive clear chromate6U divider plate 1 1,6mm aluminium alloy(not 84HP version)BS1470NS4 1/2H conductive clearchromateLocation mouldings 3 Luranyl 2452/1¤(not 84 HP version)Tapped strips 2 Steel, zinc plated and colour passivatedFixing screwsKM6-II Front divider kitKM6-II 9U Front Divider PlateThis plate will divide a 9U subrack into 3U and 6U sections.It should be ordered in conjunction with 6U front divider kits.(The 6U plate is discarded.)Ordering informationDescription9U divider plateOrder code950-202622 Front divider kit = Denotes minimum order quantity, please contact our sales officeKM6-II Left hand and Right hand Divider kitOrdering informationDescription: Left hand divider kitHeight Division Width Order code21HP 950-2026046ULeft hand divider kit24HP 950-20260542HP 950-20260660HP 950-202607Full width divider kit 84HP 950-201275Description: Right hand divider kit21HP 950-20260924HP 950-2026106U Right hand divider kit 36HP 950-20261542HP 950-20261160HP 950-202612Full width divider kit 84HP 950-201275Front divider plate6U Left hand divider kits6U Full width 84HP divider kit6U Right hand divider kits1.42UK Tel: +44 (0)2380-246900 sales@verotec.co.ukUSA Tel: 603.821.9921 sales@verotec.us