NA-LUBE - King Industries, Inc.

Since greases have performance requirements other than just rust protection, it is important toconsider the effects of rust inhibitors on different types of additives and on other grease properties.In addition to imparting excellent rust protection, K-CORR G-1107 also imparts excellent antiwearperformance.TestsBase Grease3.0%K-CORR G-11071.0% NA-LUBE ADTC3.0% Zinc Phosphate0.05% K-CORR NF-2001.0% NA-LUBE ADTC3.0% Zinc Phosphate0.05% K-CORR NF-2003.0% K-CORR G-1107EMCOR Rust Test(ASTM D 6138, IP 220)5% Synthetic Sea Water 0,0 2,2 0,0Four Ball Wear(ASTM D 2266)1 hour, 75ºC, 40 kgf, 1200 rpmScar Diameter (mm) 0.42 0.52 0.40Four Ball Weld Load(ASTM D 2596)10 seconds, 25ºC, 1800 rpmOK Load (kgf)Weld Load (kgf)K-CORR ® G SeriesAntiwear Performance K-CORR G-1107 Performance Continued140160Lithium 12-Hydroxystearate (NLGI Number 2) K-CORR G-1270 Performance In 5% & 100% Synthetic Sea WaterTestsWithoutAdditive1%G-1270140160WithoutAdditiveBase Grease Lithium 12-hydroxystearate (NLGI Number 2)1401603%G-1270Test Water 5% Synthetic Sea Water 100% Synthetic Sea WaterStatic Rust Test(ASTM D 5969) Fail Pass Fail PassEMCOR Rust Test(ASTM D 6138, IP 220) 3,3 0,0 4,4 2,2K-CORR ® ZN-510K-CORR ® G Series - Rust & Inhibitors for GreaseK-CORR ZN-510 is a zinc naphthenate rust inhibitor for industrial and automotive greases. Effectiveat low treat levels, K-CORR ZN-510 has excellent solubility in mineral oils, synthetic oils andgreases.PRODUCT Metal Content (%) AttributesK-CORR ZN-510 Zinc (10%) Highly effective rust inhibitor for grease.Pages 35-36