NA-LUBE - King Industries, Inc.

More documents

Recommendations

Info

NEW NA-LUBE ® BL-1232 ELEnvironmentally Driven...Performance ProvenThroughout the world, environmentally friendly lubricants are beingdeveloped to replace older technologies that are non-renewable and arecontaminates when released into soil or water. Almost universally, thechallenge formulators face when developing these new, replacementproducts is maintaining or surpassing the performance characteristics ofthe original.Additive Packages - BlendsA particular area of focus for new greener lubricants has been hydraulicfluids, given their propensity to leak and the ensuing ground and watercontamination. Here too, the challenge has been finding additives andadditive packages that are eco-friendly and deliver the performanceneeded. In that regard King Industries is proud to introduce NA-LUBEBL-1232 EL, an ashless, multifunctional additive package specificallydesigned for use in ester based systems including hydraulic fluids.Additive Package NA-LUBE BL-1232 EL has been evaluated against thelatest European Ecolabel criteria for lubricants. Based on that evaluation,NA-LUBE BL-1232 EL, when used as a single additive, qualifies for usein a final product eligible for the European Eco-Label in a concentrationup to 1.8% by weight. NA-LUBE BL-1232 EL Performance With Saturated EstersBase Fluid Priolube 1973Saturated EsterTreat Level, % Neat With 1.8%BL-1232 ELSteel Corrosion(ASTM D 665)Procedure A (distilled H 2O)Procedure B (synthetic sea water)Demulsibility(ASTM D 1401) @ (54°C)Oil-Water-EmulsionTime (minutes)FailFail43-37-015PassPass40-40-015Radialube ® 7588Saturated EsterNeat With 1.8%BL-1232 ELFailFail43-37-025PassPassSpecificationDIN ISO 15380PassPass41-38-025 30FZG A/8.3/90(ASTM D 5182, DIN 51 354 Part 2)Damage Load Stage n/d >12 n/d 12 10 min.Four Ball Wear (ASTM D 4172)1 hour, 22°C, 15 kgf, 1500 rpm (mm)1 hour, 22°C, 30 kgf, 1500 rpm (mm)1 hour, 75°C, 40 kgf, 1500 rpm (mm)n/d0.490.570.48n/d0.540.590.40120 max.30 max.V 104C Vane Pump(DIN EN ISO 20 763)Reported Wear Loss Ring (mg)Wear Loss Vanes (mg)n/d 4.67.5n/dn/dCopper Corrosion (ASTM D 130)3 hours, 100°C 1b 1a 1b 1a 2 max.AFNOR FiltrationDry (E 68690) FI 1.05 1.04 1.09 1.08Wet (E 68691) FI 1.28 1.08 1.33 1.12Filterability Dry (DIN ISO 13357-2)F IF II99.598.995.487.799.196.396.984.880 min.60 min.Filterability Wet (DIN ISO 13357-2)F lF ll92.583.693.885.995.082.091.779.170 min.50 min.
Base Fluid Priolube 1973Saturated EsterTreat Level, % Neat With 1.8%BL-1232 ELHydrolytic Stability (ASTM D 2619)Copper Loss (mg/cm 2 )TAN of Water Layer (mg/KOH)Copper Appearance (ASTM D 130)0.051.21b0.012.93a0.051.51bRadialube ® 7588Saturated EsterNeat With 1.8%BL-1232 EL-0.032.92cSpecificationDIN ISO 15380RPVOT (ASTM D 2272)150°C, H 2O, O 2, Cu CatalystLifetime (minutes)
Page 1: King Industries, Inc.Lubricant Addi
Page 5 and 6: Applications and Product Customizat
Page 7 and 8: NA-LUBE KR-Series Performance as a
Page 9 and 10: Because of their multifunctionality
Page 11: Enhancing the Antiwear Performance
Page 15 and 16: NA-LUBE ® ADTCMultifunctional Ashl
Page 17 and 18: The NA-LUBE EP 5000 Series consists
Page 19 and 20: NA-LUBE EP-5415 Metalworking Perfor
Page 21 and 22: Acid # (mg KOH/g)2.51.50.5Enhanced
Page 23 and 24: NA-SUL Basic Metal SaltsRRCa·CaCO3
Page 28 and 29: NA-SUL Rust and CorrosionPreventive
Page 30 and 31: Performance - NA-SUL CA-1259in Rust
Page 32 and 33: NA-SUL AqueousRust & Corrosion Inhi
Page 34 and 35: O OHO R NOOR''OR''K-CORR ® 100 Ser
Page 36 and 37: K-CORR ® G SeriesRust Inhibitors f
Page 38 and 39: K-CORR ® SA-300Ashless Rust Inhibi
Page 40 and 41: PerformanceKing HX-1 Registered Pro
Page 42 and 43: Additive Packagesfor Industrial Oil
Page 44 and 45: NA-LUBE BL-1208 Performance - Group
Page 46 and 47: NA-LUBE ® BL-1208 Performance In C
Page 50 and 51: Over Seven Decades of Manufacturing
Page 52: King Industries, Inc.1 Science Rd.N

NA-LUBE - King Industries, Inc.

Create successful ePaper yourself

Delete template?

Save as template?