NA-LUBE - King Industries, Inc.

More documents

Recommendations

Info

Additive Packagesfor Industrial Oils and GreasesMany of the NA-SUL ® , NA-LUBE ® and K-CORR ® additives are multifunctional. Ongoing additivetechnical service and the continued study of interactions, both positive and negative, lead to thedevelopment of packages that incorporates the desirable features into one blend. The packagesbelow are the results of projects targeted at specialty requirements and are generally available inlieu of additive component formulating.Additive Packages - BlendsPRODUCTNA-LUBEBL-1208NA-LUBEBL-1232 EL(Eco-Label)NA-LUBEAW-6310DESCRIPTIONAshless AW R&O package for industrial oils withoutstanding antioxidant performance in RPVOT(ASTM D 2272) and TOST (ASTM D 943) at lessthan 1.0% treat level. Test results are available inGroup I, II, III, IV (PAO) and canola oils.Environmentally friendly multifunctional ashlesshydraulic oil package specifically designed forester based functional fluids. The focus ofNA-LUBE BL-1232 EL is DIN ISO 15360:2004-05.Typical use is 1.8%. The incorporation of BL-1232EL into the formulation does not require any additionalregulatory labeling and holds the distinctionas the first additive package in compliance with theEuropean Ecolabel criteria for lubricants.Multifunctional package for AW and rust protection.Adding 0.1% AW-6310 to 0.7% BL-1208 willimprove FZG performance from ~9 to >12 damageload stages. The addition of 0.3% AW-6310 to0.7% BL-1208 will produce a mild EP industrialgear oil in the appropriate base fluid.Typical Properties - NA-LUBE BL SeriesTECHNICALREPORTSBL-12081. In Ashless IndustrialR&O Oils2. In Canola Oil3. In Group III Oils(Modified with NA-LUBE ® KR)BL-1232 EL1. In Saturated Esters2. Extended SealCompatibility3. Saturated vs.Unsaturated EstersPlease request ourNA-LUBE BL-1232 ELflyer for details of its use.NA-LUBE AW-6310Multifunctional AshlessLubricant AdditiveSee page 11 forperformance detailsTYPICAL PROPERTIESAppearanceNA-LUBE BL-1208Clear amber,moderately viscous liquidSulfur Content 7.0%Nitrogen Content 3.5%Phosphorus Content 0.2%Viscosity @ 40°C132 mm 2 /s (cSt)ASTM D 445, DIN 51 550Viscosity @ 100° C9 mm 2 /s (cSt)ASTM D 445, DIN 51 550Density @ 25°C0.976 g/mlASTM D 4052Weight per Gallon @ 25°C 8.1 lbs.Flash Point, COC140°CASTM D 92, DIN 51376NOTE: The above data are not specifications.NA-LUBE BL-1232 ELClear amber,Slightly viscous liquid8.2%2.7%0.9%180 mm 2/ /s (cSt)11 mm 2/ /s (cSt)0.990 g/ml8.2 lbs.170°C
NA-LUBE BL-1208 Performance - Group I, II, III & IV OilsThe table on this page and the following page demonstrate the performance of NA-LUBEBL-1208 at 0.7 % in typical Group I, II, III and IV base oils. Most of the test results aresimilar across the four oils except oxidation stability, which increases with the degree ofrefinement of the base oils.Base Oil ISO VG 46 ISO VG 46 ISO VG 46 PAO 6 cSt Most SevereTestsGroup I Group II Group III Group IV SpecificationTreat Level of NA-LUBE BL-1208, % 0.70 0.70 0.70 0.70Steel Corrosion (ASTM D 665)Siemens TLVProcedure B Pass Pass Pass Pass PassCopper Corrosion (ASTM D 130)GEK ISO/DP3 hours, 100°C 1b 1b 1b 1b 1b max.24 hours, 100°C 3a 3a 2a 3aDemulsibility (ASTM D 1401) @ 54ºCSiemens TLVOil-Water-Emulsion, ml 42-38-0 41-39-0 41-39-0 41-39-0 40-40-0 min.Time, minutes 20 15 25 15 20 max.FZG A/8.3/90(ASTM D 5182, DIN 51 354 Part 2)*Damage Load Stage n/d 9 n/d n/dFour Ball Wear (ASTM D 4172)40 kgf, Ambient, 1 hour, 1,200 rpmScar Diameter (mm) 0.50 0.40 0.50 0.50Hydrolytic Stability (ASTM D 2619)Alstom HTGD9 min.Industry DesiredCopper Loss (mg/cm2) 0.00 0.00 0.01 0.02 0.2 max. (HF-0)TAN of Water Layer (mg KOH) 3.81 3.53 3.09 3.93 4 max. (HF-0)Copper Appearance (ASTM D 130) 2a 2b 2e 3a 3 max.Filtration, WetAFNOR E 68691, FI 1.14 1.35 1.10 1.03DIN ISO 13357-1, F I 86.7 90.5 85.4 82.6Air Release (ASTM D 3427)Brown BovenDIN BS 489Additive Packages - BlendsMinutes 4 4 4 4 5 max.CM Thermal Stability (ASTM D 2070)Cincinnati LambViscosity Change (%) 4.66 3.53 2.59 -2.11 5 max.Acid Number Change (mg KOH/g) 0.11 0.03 0.07 0.01 50 max.Condition of Steel/Copper Rod: Color 1.5/5 1.5/4 1.5/3 1.5/4Steel Rod Deposit / Metal Loss (mg) 0.9/0.0 1.0/0.1 0.7/0.5 0.4/0.0Copper Rod Deposit / Metal Loss (mg) 2.4/0.9 0.6/0.0 0.6/0.1 0.7/0.0Total Sludge (mg/100 ml) 32.25 22.30 23.55 28.5 25 max.Whatman Precipitate (mg/100 ml) 19.05 6.80 3.56 4.15Millipore Precipitate (mg/100 ml) 12.00 15.20 19.60 24.00RPVOT (ASTM D 2272) DIN 51515-2Lifetime, minutes 598 1536 1740 2207 800 min.* The FZG Gear Test performance was determined for the Group II oil. Experience suggests that the result will be similar for the other three oilsof the same viscosity. If increasing performance in the FZG Test is desired, addition of 0.1% of NA-LUBE ® AW-6310 is expected to increase thedamage load stage to >12.Pages 41-42Continued Next Page
Page 1: King Industries, Inc.Lubricant Addi
Page 5 and 6: Applications and Product Customizat
Page 7 and 8: NA-LUBE KR-Series Performance as a
Page 9 and 10: Because of their multifunctionality
Page 11: Enhancing the Antiwear Performance
Page 15 and 16: NA-LUBE ® ADTCMultifunctional Ashl
Page 17 and 18: The NA-LUBE EP 5000 Series consists
Page 19 and 20: NA-LUBE EP-5415 Metalworking Perfor
Page 21 and 22: Acid # (mg KOH/g)2.51.50.5Enhanced
Page 23 and 24: NA-SUL Basic Metal SaltsRRCa·CaCO3
Page 28 and 29: NA-SUL Rust and CorrosionPreventive
Page 30 and 31: Performance - NA-SUL CA-1259in Rust
Page 32 and 33: NA-SUL AqueousRust & Corrosion Inhi
Page 34 and 35: O OHO R NOOR''OR''K-CORR ® 100 Ser
Page 36 and 37: K-CORR ® G SeriesRust Inhibitors f
Page 38 and 39: K-CORR ® SA-300Ashless Rust Inhibi
Page 40 and 41: PerformanceKing HX-1 Registered Pro
Page 44 and 45: NA-LUBE BL-1208 Performance - Group
Page 46 and 47: NA-LUBE ® BL-1208 Performance In C
Page 48 and 49: NEW NA-LUBE ® BL-1232 ELEnvironmen
Page 50 and 51: Over Seven Decades of Manufacturing
Page 52: King Industries, Inc.1 Science Rd.N

NA-LUBE - King Industries, Inc.

Create successful ePaper yourself

Delete template?

Save as template?