NA-LUBE - King Industries, Inc.

PerformanceKing HX-1 Registered Products NA-LUBE AW-6400FG PerformanceNA-LUBE AW-6400FG is an ashless, HX-1 approved, multi-functional additive that offers anticorrosion,antiwear and EP properties. As shown, NA-LUBE AW-6400FG is effective in a variety of H-1approved base oils.TestsHX-1 Approved Base Oil0.50%AW-6400FGPAO 100.50%AW-6400FGWhite Oil0.50%AW-6400FGNA-LUBEKR-029FG0.50%AW-6400FGViscosity @ 40°C 96 cSt 110 cSt 177 cSt 220 cStSteel Corrosion (ASTM D 665, DIN 51 585) A & B Pass Pass Pass PassDemulsibility (ASTM D 1401, DIN 51 599)Oil-Water-EmulsionSeparation Time (Minutes)Copper Corrosion (ASTM D 130, DIN 51 759)3 hours, 100°C24 hours, 100°CFour Ball Wear (ASTM D 4172)1 hour, 75°C, 1200 rpm, 30 kgf, Scar Diameter (mm)1 hour, 75°C, 1200 rpm, 40 kgf, Scar Diameter (mm)Four Ball Weld (ASTM D 2783)10 seconds, 25°C, 1800 rpmOK Load (kgf)Weld Load (kgf)Ashless Additives - NA-LUBE ®41-39-0101a1b0.380.4816018043-37-0151a1b0.370.51140160AO-142 & K-CORR NF-20039-41-0341a1b0.380.40140160Ester14-12-6430K-CORR NF-200 is a HX-1 food grade approved yellow metal deactivator that protects copper andcopper alloys against corrosion initiated by active sulfur. K-CORR NF-200 also enhances theoxidation stability of food grade lubricants and greases when used in combination with HX-1 foodgrade approved NA-LUBE ® AO-142 and an ashless dithiocarbamate.1a1b0.400.41140160NSF HX-1 Registered ProductsK-CORR NF-200 is recommended for formulating high performance food grade circulating andsteam turbine oils, hydraulic oils, vacuum oils, and industrial gear oils, as well as greases.TestsBase OilFORMULATIONCopper Corrosion(ASTM D 130, DIN 51 579)3 hours, 100° C24 hours, 100° CDemulsibility(ASTM D 1401, DIN 51 599)Oil-Water-EmulsionTime (Minutes)0.20%NA-LUBE AO-1421a2a40-40-0150.20% NA-LUBE AO-1420.50% Ashless DithiocarbamateISO VG 110 - White Oil1b3b40-36-4300.20% NA-LUBE AO-1420.50% Ashless Dithiocarbamate0.05% K-CORR NF-2001a1b40-40-015RPVOT(ASTM D 2272)Lifetime (Minutes) 141 2670 3735Pages 39-40