SDIKTM ProcessControl2TM Setup Guide - Fishman® Corporation

CAUTION:Do not over-tighten the syringe. It is only necessary tomake a loose connection to bring the syringe flush.The retaining ring holds the syringe in place.TIP:It may be necessary to click theEXTEND(Retract) button to RETRACT(Extend)and press the finger switch to bring theears completely flush to the retaining plate.If you set the switch to RETRACT(Extend),be sure it is set back to EXTEND(Retract)before proceeding.EXTEND(Retract)RETRACT(Extend)7.6 Slide the retaining ring coverover the Genius syringe andalign the legs with the openslots of the adapter plate.7.7 Rotate the retaining ring coverin a clockwise direction untilit locks in place. The syringe isnow firmly connected to thedispenser gun.International +00 1 508-435-2115 www.fishmancorp.com 17