SDIKTM ProcessControl2TM Setup Guide - FishmanÂ® Corporation

More documents

Recommendations

Info

8.0 Prime the Genius FreeFlow Dispense Tip8.1 Remove tip cap from the syringe by twistingcounter-clockwise and pulling. Attach the 18Ggreen Genius FreeFlow Tapered Tip providedin the Dispense Tip kit.8.2 Hold the dispense tip over the provided dot chartas shown, press the finger switch intermittentlyuntil the fluid begins to flow towards the end ofthe Genius FreeFlow tip.Goal: To stop the fluid when flush with the end of the GeniusFreeFlow tip with no air pockets.Tip:Genius all plastic FreeFlow tips work best. There aremultiple size tips indicated by color. To find the tip that worksbest increase or decrease gauge size. If a stainless steeldispense tip is necessary always use .25” length tip.8.3 If too little fluid: Continue to presson the finger switch intermittentlycausing the fluid to flow to the tip.18 Fishman <strong>Corporation</strong> USA Toll Free 1-800-433-2115
8.4 If too much fluid: On thecontrol panel, click theEXTEND(Retract) buttonto RETRACT(Extend).8.5 Press the finger switch insmall short pulses until thefluid stops flowing from the tip.EXTEND(Retract)RETRACT(Extend)Goal: To stop the forward motion of the fluid byretracting the piston and sucking the fluid back.8.6 Clean the tip so it appears as pictured.Note: If the material continues to ooze,repeat step 8.4 to 8.5.8.7 On the control panel, click theRETRACT(Extend) button toEXTEND(Retract).RETRACT(Extend)8.8 Click MANUAL(Auto) button toAUTO(Manual).8.9 Click the arrow next to Barrel Sizeto drop down menu and select thesize of the syringe you are using.EXTEND(Retract)MANUAL(Auto)AUTO(Manual)8.10 Click OK on the pop-up message.International +00 1 508-435-2115 www.fishmancorp.com 19
Page 2: 3 Fishman Corporation USA Toll Free
Page 7 and 8: 4. Hook up your SmartDispenser Inte
Page 9 and 10: 5. Startup and Logon theProcessCont
Page 11 and 12: 5.3 The system software will now be
Page 13 and 14: 5.7 On SmartDispenser Integration K
Page 15 and 16: 7.0 Attach the Genius Syringeto LD
Page 17: CAUTION:Do not over-tighten the syr
Page 22 and 23: 9C Anatomy9D Dot AnatomyLengthDWidt
Page 24 and 25: 9.5 Click Dispense Volume (cc) and
Page 26 and 27: 9.16 Press the finger switch as man
Page 28 and 29: 9.30 Repeat 9.19 - 9.29 as many tim
Page 30 and 31: 11.0 Clear SavedProcessControl 2 Pr
Page 32: Fishman Corporation192 South Street

SDIKTM ProcessControl2TM Setup Guide - FishmanÂ® Corporation

Create successful ePaper yourself

Delete template?

Save as template?