15.08.2012 Views

2009 Maxima Owner's Manual

2009 Maxima Owner's Manual

2009 Maxima Owner's Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

WHA0903<br />

Beep setting<br />

With this option on (indicator light illuminated), a<br />

beep will sound if any control panel button is<br />

pressed.<br />

Phone settings<br />

For phone settings refer to “Bluetooth� Hands-<br />

Free Phone System with Navigation System (if so<br />

equipped)” later in this section.<br />

OFF BUTTON<br />

To change the display brightness, press<br />

the OFF button. Pressing the button again<br />

will change the display to the day or the<br />

night display. Then, adjust the brightness<br />

by using the NISSAN controller.<br />

If no operation is done within 10 seconds, the<br />

display will return to the previous display.<br />

Press and hold the OFF button for more<br />

than 2 seconds to turn the display off. Press the<br />

button again to turn the display on.<br />

4-28 Monitor, climate, audio, phone and voice recognition systems<br />

REARVIEW MONITOR (if so<br />

equipped)<br />

When the shift selector is shifted into the R<br />

(Reverse) position, the monitor display shows the<br />

view to the rear of the vehicle.<br />

The system is designed as an aid to the driver in<br />

detecting large stationary objects to help avoid<br />

damaging the vehicle. The system will not detect<br />

small objects below the bumper and may not<br />

detect objects close to the bumper or on the<br />

ground.<br />

WARNING<br />

● The rear view camera is a convenience<br />

but it is not a substitute for proper backing<br />

up. Always turn and check that it is<br />

safe to do so before backing up. Always<br />

back up slowly.<br />

● Objects viewed in the RearView Monitor<br />

differ from actual distance because<br />

a wide-angle lens is used. Objects in the<br />

RearView Monitor will appear visually<br />

opposite than when viewed in the rear<br />

view and outside mirrors.<br />

● Make sure that the trunk is securely<br />

closed when backing up.<br />

● Underneath the bumper and the corner<br />

areas of the bumper cannot be viewed<br />

on the RearView Monitor because of its<br />

monitoring range limitation.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!