2009 Maxima Owner's Manual

Activating Alternate Command Mode
1. Press the SETTING button on the instrument
panel.
2. Highlight the “Others”key on the display and
then press the ENTER button.
3. Highlight the “Voice Recognition” key and
then press the ENTER button.
WHA1125 LSU0026 LSU0027
4. Highlight the “Alternate Command Mode”
key and press the ENTER button.
5. The confirmation message is displayed on
the screen. Select the “OK” key and press
the ENTER button to activate the Alternate
Command Mode.
4-126 Monitor, climate, audio, phone and voice recognition systems
6. Alternate Command Mode is activated and
the setting menu is expanded to include the
Alternate Command Mode options. See
“Settings menu” later in this section for an
explanation of the options.
Displaying the command list
If you are controlling the system by voice commands
for the first time or do not know the
appropriate voice command, perform the following
procedure for displaying the voice command
list (available only in Alternate Command Mode).
Press the switch, listen for the tone and
say, “Help”. The system will respond by displaying
the command list main menu.