15.08.2012 Views

2009 Maxima Owner's Manual

2009 Maxima Owner's Manual

2009 Maxima Owner's Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

PUSH STARTING IF YOUR VEHICLE OVERHEATS<br />

CAUTION<br />

● CVT models cannot be push-started or<br />

tow-started. Attempting to do so may<br />

cause transmission damage.<br />

● Do not push start this vehicle. The<br />

three-way catalyst may be damaged.<br />

6-10 In case of emergency<br />

If your vehicle is overheating (indicated by an<br />

extremely high temperature gauge reading) or if<br />

you feel a lack of engine power, detect abnormal<br />

noise, etc., take the following steps.<br />

WARNING<br />

● Do not continue to drive if your vehicle<br />

overheats. Doing so could cause engine<br />

damage or a vehicle fire.<br />

● To avoid the danger of being scalded,<br />

never remove the radiator cap while the<br />

engine is still hot. When the radiator<br />

cap is removed, pressurized hot water<br />

will spurt out, possibly causing serious<br />

injury.<br />

● Do not open the hood if steam is coming<br />

out.<br />

1. Move the vehicle safely off the road, apply<br />

the parking brake and move the shift selector<br />

to P (Park).<br />

Do not stop the engine.<br />

2. Turn off the air conditioner. Open all the<br />

windows, move the heater or air conditioner<br />

temperature control to maximum hot and fan<br />

control to high speed.<br />

3. Get out of the vehicle. Look and listen for<br />

steam or coolant escaping from the radiator<br />

before opening the hood. (If steam or coolant<br />

is escaping, turn off the engine.) Do not<br />

open the hood further until no steam or<br />

coolant can be seen.<br />

4. Open the engine hood.<br />

WARNING<br />

If steam or water is coming from the engine,<br />

stand clear to prevent getting burned.<br />

5. Visually check drive belts for damage or<br />

looseness. Also check if the cooling fan is<br />

running. The radiator hoses and radiator<br />

should not leak water. If coolant is leaking, the<br />

water pump belt is missing or loose, or the<br />

cooling fan does not run, stop the engine.<br />

WARNING<br />

Be careful not to allow your hands, hair,<br />

jewelry or clothing to come into contact<br />

with, or get caught in, engine belts or the<br />

engine cooling fan. The engine cooling<br />

fan can start at any time.<br />

6. After the engine cools down, check the coolant<br />

level in the engine coolant reservoir tank<br />

with the engine running. Add coolant to the<br />

engine coolant reservoir tank if necessary.<br />

Have your vehicle repaired at a NISSAN<br />

dealer.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!