2009 Maxima Owner's Manual

Backing up near a projecting object
The predicted course lines �A do not touch the
object in the display. However, the vehicle may hit
the object if it projects over the actual backing up
course.
LHA1201 LHA1202
Backing up behind a projecting object
The position �C is shown further than the position
�B in the display. However, the position �C is
actually at the same distance as the position �A .
The vehicle may hit the object when backing up to
the position �A if the object projects over the
actual backing up course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, push the SETTING button with the
RearView Monitor on, select the item key and
adjust the level using the NISSAN controller.
Do not adjust the Brightness, Tint, Color, Contrast
and Black Level of the RearView Monitor
while the vehicle is moving. Make sure the parking
brake is firmly applied and the engine is not
running.
OPERATING TIPS
● When the shift selector is shifted to the R
(Reverse) position, the display screen automatically
changes to the RearView Monitor
mode. However, the radio can be heard.
● It may take some time until the RearView
Monitor or the normal screen is displayed
after the shift selector has been shifted to R
from another position or to another position
from R. Objects may be distorted momentarily
until the RearView Monitor screen is
displayed completely.
Monitor, climate, audio, phone and voice recognition systems 4-33